Maglite 3 x P7 Divelight

First I want to say thanks for all the nice help I got from this Web site CPF. to buildt my first Maglite dive light.
My Maglite is a 3 x P7 with 2 x ( 6volt 4,5 A Nimh) and a control to give me 2800mA. Reflector viewing angle 40.
There are two movies with 3 guys, we are 30M down and I brought some day light with me down under. The braightes light in the movies is my Maglite P7
It is a great divelight :twothumbs.
The movies is from today 08-11-2008 time 10am - 12am .Denmark
Links to my short zip file 41mb : http://odessa.dk/Foto Dyk/3 x P7 Small.zip

Links to my large zip file 107mb :http://odessa.dk/Foto Dyk/3 x P7 Large.zip

The color rendition in the picture looks very nice. going to download the movies and see what fun you had.

AlexGT

Edit: The download speed is slow for me at only 125kb/s even though I have a 6mbps DSL

Cool light! Did you do any mods to the maglight body/head to make it "extra" waterproof?

Downloading video as we speak...getting a steady 430kb/sec

WOW very nice!

Not bad..

What is your burn time??

gibby_z said:

Not bad..

What is your burn time??

Click to expand...

I will allways have max burn time four 2 dives ( 1 dive is from 25 - 60 min how deep you go down )

Cryhavok : i use Scubaboard forum to find out how to get it waterproof
and i use CPF forum to find out what item i need to but in my Maglite

sorry four my englisk

It is very good to see this project was such a success - well done!

2 of your photos in post #1 are over-size. Could you edit them to 800 x 800 pixels maximum please.

cryhavok said:

Cool light! Did you do any mods to the maglight body/head to make it "extra" waterproof?

Click to expand...

Step one. Cut off switch section with a hacksaw and epoxy handle in to head.
Step two. Change all O rings for the next size up.
Step three. Replace lens with a thicker one. The stock one goes concave enough at 45 meters to push against a MR16 halogen lens to break it