Klarus        
Results 1 to 12 of 12

Thread: Bike light group test

  1. #1
    Enlightened
    Join Date
    Nov 2008
    Location
    London
    Posts
    21

    Default Bike light group test

    I help administer a bike forum in the UK (www.yacf.co.uk)

    Like most gear-obsessed cyclists, come the winter, lighting is a big topic of conversation and I thought it might be a nice idea for some of us to get together and do some testing of the latest lighting kit that we all own and use.

    Last Thursday, we had a mammoth session in my garage/workshop and the results are reproduced below. The original thread is available on YACF here, but I thought that this would be of some interest to CPFers.

    Many thanks to Graham and Jonathan, our photographers - without whom this test wouldn't have been nearly as good. Enjoy:



    Part 1 - Introduction

    This light test was Charlotte's idea. She put together all the hard work in organizing people and getting all the facilities together, and she and Liz worked very hard to get the garage set up.

    All I did was put the camera on the tripod (Jonathan took the pictures). I just happened to have the sheet with the numbers on it, so I've put this bit together.

    Any plaudits are entirely and completely due to Charlotte. Any mistakes are my fault, and I'm happy to take the blame for them.

    The plan was to get a bunch of lights together, battery and dynamo powered, LED and incandescent and see how they performed. How hard could it be?

    The lights were to be tested indoors, to allow the light output to be measured and to compare beam shapes, and outdoors to see what how they performed in "real world" conditions.

    The battery powered lights all had freshly charged batteries. To ensure consistency with the dynamo lights, Charlotte mounted them all on her bike equipped with a hub dynamo. This bike was then put onto a set of rollers and pedalled up to a constant 15mph/25kph.

    As you can see, this was a nerve wracking proposition



    Outdoors, when the rollers & tyres were wet, was even scarier. I wouldn't have done it, and I briefed Jonathan to be ready to get out of the way if it went pear shaped.

    For the indoors testing, the lights were shone along the length of the bunker onto a target on the end wall, then several things were done:

    1. A light reading taken in the centre of the beam, and another at one metre away from the centre (for the incandescent lights this was taken horizontally, for the LED's either horizontally or vertically as their beam patterns tended to be more even). The light meter was set to display EV values, where an increase of 1 results from a doubling of the measured light. I then converted these to absolute values to allow the output of the lights to be easily compared.

    2. A picture was taken of the target (obviously lit only by the light) with the camera set to auto. It was hoped that when these pictures were put together they would all be roughly the same brightness so that the beam patterns could be compared.

    3. A picture was taken of the target with the camera set to manual exposure. For these, we hoped that when they were put together we would easily be able to compare the brightness of each light.

    For the indoor pictures, the camera was set to 1000ASA.

    Without pausing to even drink a cup of tea or scoff any Jaffa cakes, bikes were loaded up and a convoy set off (complete with rollers) for the local park where pausing only to scatter the doggers we set out to take more pictures.

    The lights were all aimed along the path, which being nice and dark simulated the road, at a point which was about 20 metres away. A little way past that point we put a Brompton to have an example of a real world object that would reflect some light.

    Again, two pictures were taken, one on auto to compare beam patterns, and the other on manual to compare brightness.

    Although the lights could be easily aimed at the target indoors, outdoors it wasn't as simple. Because most of the lights didn't have a clearly defined centre spot (if they did, they would probably be useless as bicycle lights) they were aimed to try and maximise the amount of path that they lit up, but including the aiming point.

    For the outdoor pictures the camera was set to 3200ASA (it's maximum) to reduce exposure time and also reduce the cameras exposure to the rain. That made the pictures a bit grainy, but not so much that it caused problems.
    Last edited by Charlotte; 12-01-2008 at 03:50 AM.

  2. #2
    Enlightened
    Join Date
    Nov 2008
    Location
    London
    Posts
    21

    Default Re: Bike light group test

    Part 2 - Measurements





    (If anybody wants the data as a CSV, let me know)
    Last edited by Charlotte; 12-02-2008 at 09:03 AM. Reason: Updating links

  3. #3
    Enlightened
    Join Date
    Nov 2008
    Location
    London
    Posts
    21

    Default Re: Bike light group test

    Part 3 - Indoor pictures

    Below are composites of the indoor pictures, first the auto exposures (to show beam shape), second the manual exposures (to compare brightness).

    The name of the light and the exposure value are show on each individual photograph. Because they may be too small to read here, click on the picture to be taken to the Picasa album from where you can download a larger version.

    Beam Shape



    Brightness

    Last edited by Charlotte; 12-02-2008 at 09:03 AM. Reason: Updating links

  4. #4
    Enlightened
    Join Date
    Nov 2008
    Location
    London
    Posts
    21

    Default Re: Bike light group test

    Part 4 - Outdoor Pictures

    As with the indoor pictures, these are linked to the album where you can download the images.

    Beam Shape



    Brightness

    Last edited by Charlotte; 12-02-2008 at 09:04 AM. Reason: Updating links

  5. #5

    Default Re: Bike light group test

    Wow! Great stuff. I'll have to spend some more time looking at the photos, but this is fantastic to see the latest/greatest generator lights side by side with the battery stuff.

    Jack

  6. #6
    Flashaholic msxtr's Avatar
    Join Date
    Jan 2007
    Location
    Lleida - Spain
    Posts
    143

    Default Re: Bike light group test

    Quote Originally Posted by Charlotte View Post
    Part 2 - Measurements





    (If anybody wants the data as a CSV, let me know)
    Hi, that datas, are lumens? lux??

    Greetings - Saludos

    msxtr

  7. #7
    Enlightened
    Join Date
    Nov 2008
    Location
    London
    Posts
    21

    Default Re: Bike light group test

    Quote Originally Posted by msxtr View Post
    Hi, that datas, are lumens? lux??
    The light meter was set to display EV values, where an increase of 1 results from a doubling of the measured light. I then converted these to absolute values to allow the output of the lights to be easily compared.

  8. #8
    Flashaholic* Calina's Avatar
    Join Date
    Jul 2006
    Location
    Longueuil, Québec
    Posts
    952

    Default Re: Bike light group test

    Great thread!

    Since I have a Fenix L2D, I'd like to know what LED yours has (P4, Q2, Q5)?

    The Betty 6 is incontestably the brightest (and priced accordingly) but I can't help being impressed by the beam quality of the E6. Now if we could only get a "real" bike optic for the LEDs ...

    Thanks.
    Health is merely the slowest possible rate at which one can die.

  9. #9

    Default Re: Bike light group test

    I like the B&M and similar beams. The airbikelight is too floody, and for me is aoutperformed by the Dinotte 600L and is closer to the 200L in useable light.

  10. #10

    Default Re: Bike light group test

    Wow! Very nice - it would be interesting to see if that horizontal beam with the brightness gradient could be reproduced without going to a "sideshooter" type reflector?

  11. #11
    Enlightened
    Join Date
    Nov 2008
    Location
    London
    Posts
    21

    Default Re: Bike light group test

    Quote Originally Posted by Calina View Post
    Since I have a Fenix L2D, I'd like to know what LED yours has (P4, Q2, Q5)?
    It's a Q5. The surprising thing about this test for me was just how bright the incandescent lights were at the centre of their beams. Unfortunately, for real world riding, an E6 is still comprehensively trumped by an IQ Cyo. I wish we'd have got a Lumicycle Halogen on loan for the test!

  12. #12
    Enlightened
    Join Date
    Aug 2007
    Location
    Houston, TX
    Posts
    26

    Default Re: Bike light group test

    Awesome review. Thanks.

    I run 2xL2D Q5, with a third (for helmet) on order.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •