• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired closed: O-rings for SASE

Drywolf

Flashlight Enthusiast
Joined
Feb 18, 2008
Messages
1,246
Location
Golden Poppy State
Will trade one set of O-rings for a SASE. The first seven to request a set will get one set. I will PM the seven traders with my address after the seven slots are filled.

I have seven sets of O-rings
Each set has at least one and maybe two of the following sizes

#015 Silicone
#016 Silicone
#017 Silicone
#019 EPDM
#025 EPDM

#1 mcmc --------------- sent
#2 Steve L (plus Buna) -- sent
#3 datiLED ------------- sent
#4 Illumination --------- sent
#5 Ducaticorse --------- sent
#6 alphazeta ----------- sent
#7 InFlux

I also have two extra "2X22mm Buna" O-rings. If you need one of these please say so and the first two CPFer's to ask will get one with their set of O-rings.
Thanks,
Frank


The following is borrowed from McGizmo forum. Please go there for verification if needed.
O-Rings 4 a few McGizmo lights
XR27 & S27 Head:
Window Seal O-ring - 2 x 22 mm Buna (Nitrile)
Window retaining O-ring - #025 EPDM
Head to pak Seal - #017 Silicone (red)

PD Piston:
Piston to sleeve seal - #015 Silicone (use #016 for added protection but stiffer activation)

PD head:
Window Seal O-ring - #019 EPDM
Head to sleeve seal O-ring - #017 Silicone

LS20:
the window is between two #019 EPDM O-rings
the piston and head/ sleeve O-rings are silicone (#016 & #017 respectively)
 
Last edited:

mcmc

Flashlight Enthusiast
Joined
Feb 23, 2006
Messages
1,865
Re: WTT: O-rings for SASE

Wow, thank you DryWolf. I would like one set please sir.
 

Steve L

Flashlight Enthusiast
Joined
Jan 22, 2007
Messages
1,470
Location
SE Michigan
Re: WTT: O-rings for SASE

Hi Drywolf,

Thanks for the very generous offer. I would like one set plus one of the extra "2X22mm Buna" O-rings Please.
Happy Holidays!!!

Thanks,
Steve
 
Last edited:

Ducaticorse

Newly Enlightened
Joined
Aug 26, 2007
Messages
78
Re: WTT: O-rings for SASE

Thanks a bunch, Frank - I'd be interested in a set!
 

alphazeta

Enlightened
Joined
Mar 22, 2007
Messages
292
Location
NYC
Re: WTT: O-rings for SASE

That's a great gesture. I could certainly use a set if you still have one available.

Thanks!
AZ
 

InFlux

Enlightened
Joined
Sep 30, 2004
Messages
465
Location
In Flux
Re: WTT: O-rings for SASE

I'd like a set please! If the 2x22 can be used in a 27LT-S I could use that too.

Thanks again! :wave:
-Rob
 

Drywolf

Flashlight Enthusiast
Joined
Feb 18, 2008
Messages
1,246
Location
Golden Poppy State
Re: WTT: O-rings for SASE

I'd like a set please! If the 2x22 can be used in a 27LT-S I could use that too.

-Rob
Hi Rob,
This is from the McGizmo forum:

27LT & 27LT-S head:
Window Seal - #023 EPDM
2x head to Pak seal - #017 Silicone


I don't think you need the 2X22. If you want it I will send it anyway.
Thanks,
Frank
 
Top