Fenix Outfitters        
Results 1 to 5 of 5

Thread: WTB: heatsinks for p7 and p4

  1. #1

    Default WTB: heatsinks for p7 and p4

    i've been looking around for heatsinks for ssc p7 and p4 and cant find them anywhere. can someone direct me to a seller or site that has them. if they also sold the p7 and the glue that would be great! thanks,
    jasonsmaglites
    6d rop high 4dmag tri-cree 4d mag penta q5 (fs)
    mte seoul aa 3aa magled q5mod fenix l0d q4 on 10440s
    fenix l2d q5 fenix l2d rebel 100 3dmag w/monsterthrowIII

  2. #2
    Flashaholic* 04orgZx6r's Avatar
    Join Date
    Mar 2008
    Location
    North of Indy, Indiana
    Posts
    523

    Default Re: WTB: heatsinks for p7 and p4

    BriteLumens, the Sandwhich Shoppe, and 4sevens all have what you are looking for
    Last edited by 04orgZx6r; 12-20-2008 at 12:27 AM.
    ........__o….….….........__o ………......... _o _(_)
    ....._ \<,_.……….…..._ \<,_(_)…....._ \<,/
    ....(_) / (_)…..…....(_) /…………......(_)………….////04

  3. #3

    Default Re: WTB: heatsinks for p7 and p4

    all i found was this one for a cree. if im not mistaken the one for the p7 and the p4 are two different ones. can someone help me with a link to a heatsink that would be perfect for the p7. thanks,
    jasonsmaglites

    http://theledguy.chainreactionweb.co...cea8a1&x=0&y=0
    6d rop high 4dmag tri-cree 4d mag penta q5 (fs)
    mte seoul aa 3aa magled q5mod fenix l0d q4 on 10440s
    fenix l2d q5 fenix l2d rebel 100 3dmag w/monsterthrowIII

  4. #4

  5. #5

    Default Re: WTB: heatsinks for p7 and p4

    cool. i'm going with dd for reliability, efficency, and most importantly ease of build. however, is there a driver/circuit you guys recomend for a 3 or 4 d mag driving a p7?
    6d rop high 4dmag tri-cree 4d mag penta q5 (fs)
    mte seoul aa 3aa magled q5mod fenix l0d q4 on 10440s
    fenix l2d q5 fenix l2d rebel 100 3dmag w/monsterthrowIII

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •