TK10 Help

Zatoichi

Flashlight Enthusiast
Joined
Aug 29, 2008
Messages
1,099
Location
UK
I'm just wondering if it's normal that my TK10 head only needs loosening a tiny bit to go into low mode (say 1 - 2 mm). I always leave it in high mode but it sometimes comes on in low due to it only needing to be loosened such a small amount. If it's not normal, is there any DIY fix I can try? Cheers.
 

WadeF

Flashlight Enthusiast
Joined
Apr 24, 2007
Messages
4,180
Location
Perkasie, PA
Sounds normal. As soon as you loosen it you break the connection in the head and it drops to low. You could try cleaning the contacts to improve reliability.
 

TONY M

Flashlight Enthusiast
Joined
Jan 31, 2008
Messages
1,548
Location
Belfast, NI
It does sound normal. As Wade says try cleaning the contacts anyway if you have not already done so.
 

Zatoichi

Flashlight Enthusiast
Joined
Aug 29, 2008
Messages
1,099
Location
UK
Thanks WadeF and Tony. I just had another look and I think I've grasped how it works, and I see there'd be no way to make it stay on high with the head looser. I was just a little concerned it might develop into a problem, but it seems it wont. :)
 
Top