Re: WTT: 2 X Nichia High CRI on MCPCB
If I am correct, it gets 90-100 lumen for 350mah which is a recommended max. Check
this out if you haven't.
This should be same one he used for Sundrop.
I have put in one of them in 120P with modded stock reflector. The reflector was modified for P7 so the opening was huge. Luckily it worked ok but generaly speaking I think it is very difficult to focus as the multiple small dies are in the LED.
Also, I forgot to mention they are mounted on MCPCB.
Please let me know,
Thanks,
From griff's description (posted by Mcgizmo)
The MCPCB is .750" in diameter and 1/16" thick. The notches are roughly 1/8" diameter on .750" centers and the MCPCB can be clamped similar to the starboards if you wish. If you want the LED to share a common ground, you can use a small screw through the little hole and the screw head will pick up contact with the (-) lead of the LED by virtue of a tinned circle of trace around the hole that is common to the LED (-). In some of my builds, I have to break the trace connection here as I use that hole but don't want the LED to be grounded.
I don't have the time or interest in getting into the component supply side but I have plenty of these and some of you want them.
What my offer is is a minimum of 10 pieces of these LED's on MCPCB for $15 ea. plus shipping. If you guys want to divvy these up further, be my guest but leave me out of the equation, please.