Jan 22, 2009 #1 M michaelmcgo Enlightened Joined Aug 15, 2006 Messages 267 I have an original (Luxeon III) Fenix L1t with both a 1xAA and 2xAA body. I am considering getting a V2.0, but only if the new head and tailcap will fit on the old body....
I have an original (Luxeon III) Fenix L1t with both a 1xAA and 2xAA body. I am considering getting a V2.0, but only if the new head and tailcap will fit on the old body....
Jan 22, 2009 #2 Gunner12 Flashaholic Joined Dec 18, 2006 Messages 10,063 Location Bay Area, CA Nope, doesn't fit. The V2.0 is compatible with the L1D/L2D/P2D/LD10/LD20/PD20. Those lights aren't compatible with the old L1T/L2T so the V2.0 won't be either.
Nope, doesn't fit. The V2.0 is compatible with the L1D/L2D/P2D/LD10/LD20/PD20. Those lights aren't compatible with the old L1T/L2T so the V2.0 won't be either.
Jan 23, 2009 #3 C4LED Enlightened Joined Jun 30, 2005 Messages 463 Location East Coast, USA Right, so if you get the L1T V 2.0, then you need to get an L2D body (about $13) to go with it. I did this - works great. Here's a link
Right, so if you get the L1T V 2.0, then you need to get an L2D body (about $13) to go with it. I did this - works great. Here's a link