Dereelight DBS v3mc-e

Wanting to know output of bds v3 mc-e and what is its max distance
thanks

In my opinion it is about 400-500 Lumen.

Thinking of getting an upgrade to the MC-E and it draws 2.1a so should be nearer 600 lumen's i hope.

electric sheep said:

Thinking of getting an upgrade to the MC-E and it draws 2.1a so should be nearer 600 lumen's i hope.

Click to expand...

Hello all. New guy here would like to know best place to buy this one in the USA?

Thanks

The US distribution is FlashCrazy but in the UK i went to Dereelight but they are celebrating Chinese New Year until early Feb.

electric sheep said:

Thinking of getting an upgrade to the MC-E and it draws 2.1a so should be nearer 600 lumen's i hope.

Click to expand...

To get 600 Lumens, you need a current about 3A.

I did some quick tests between the MC-E 2.1A pill and the MC-E 2.4A pill. It sounds like the 2.4A pill may no longer be offered, but I managed to get one while they were. So I wanted to see just how much difference there was. I put them in my DBS V1, which has a AR lens installed.

The 2.1A pill was drawing 1.14A from 2xAWR123's, fresh off the charger. LUX at 1 meter was right around 10,000LUX.

The 2.4A pill was drawing 1.4A from 2XAWR123's, also fresh off the charger. LUX at 1 meter was right around 12,000LUX.

neoseikan said:

To get 600 Lumens, you need a current about 3A.

Click to expand...

I don't delve much into the the math or science here but Mr. Malkoff is getting 500 lumens out of a 1.3A draw (on 6V) so the MC-E must more efficient.

Wattnot said:

I don't delve much into the the math or science here but Mr. Malkoff is getting 500 lumens out of a 1.3A draw (on 6V) so the MC-E must more efficient.

Click to expand...

3A to the emitter, not 3A draw off two CR123's.