ocelot27
Newly Enlightened
- Joined
- Feb 8, 2009
- Messages
- 17
Hi,
I'd like to up the voltage on the board of an Inova X1 to power a 365nm 5mm Nichia LED. First is this possible by just swapping out a resistor? I've included some pics of the board.
TIA - john.
I'd like to up the voltage on the board of an Inova X1 to power a 365nm 5mm Nichia LED. First is this possible by just swapping out a resistor? I've included some pics of the board.
TIA - john.
