• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired Custom P7 Mags FS - limes nascar and others!

plasmaman

Enlightened
Joined
Feb 25, 2006
Messages
383
Location
The boat house in Hereford, UK
DPP_0001.jpg



DPP_0004.jpg


C bin (CSXOI 700-900 lumens) Mag P7 customs available.
These lights are all one offs I have built.

Numbered from left to right 1 through 8.
1 – 7 are D bodies, and 8 is a C body.

All have UCL glass lens. See individual notes for details.
All use H22 or similar anodised heatsinks. Tailcap switches are Mac spec Judco switches.

All are in excellent condition and unmarked.

I am also offering 1 new 7.5ah Lithium D cell to the buyer of each D light. Some might remember my posts about these cells a little while back – well I finally managed to secure a very small number of these cells (no more available so please don't ask) and I will not sell cells without lights. I have built these lights with the D cell in mind, but they will of course run on any other suitably sized Lithium cell (18650 or C cell) but you will need a spacer or mod.

The black 2C takes 3 x NiMh sub C cells (included) made into a pack
I am in UK and will ship anywhere on receipt of payment. Paypal only please (4% already included). Standard postal shipping free in UK, and $22 per light anywhere else (including 1 D cell if purchased).

So here's the specs:
§1 – purple D shorty, chrome bezel, tailcap switch, modded Mag reflector, direct drive. Length 5.5 inches.SOLD!
§2 – lime green D shorty, grooved head, turned bezel, tailcap switch, modded alu MOP reflector, direct drive. Length 5.5 inches. SOLD!
§3 – Mag racing D shorty, tailcap switch, modded alu MOP reflector, direct drive. Length 6.5 inches. Includes delrin/alu spacer.
§4 – dark blue 1D, pewter bezel, side switch modded, modded Mag reflector, TaskLED d2dimm board for variable output.
§5 – Nascar fade 1D, grooved and fluted head, side switch modded, modded alu MOP reflector, TaskLED d2dimm board for variable output.
§6 – lime green 1D, chrome bezel, side switch modded, modded alu MOP reflector, TaskLED d2dimm board for variable output..
§7 – red 1D, grooved and fluted head, side switch modded, modded alu MOP reflector, TaskLED d2dimm board for variable output.
§8 – black 2C, Kiu stainless bezel with glow dots, modded Mag reflector, TaskLED d2flex board for variable output.

Prices:
§1 - $195 light only, $245 inc D cell. SOLD
§2 - $275 light only, $325 inc D cell SOLD
§3 - $275 light only, $325 inc D cell
§4 - $225 light only, $275 inc D cell
§5 - $330 light only, $380 inc D cell
§6 - $330 light only, $380 inc D cell SOLD
§7 - $265 light only, $315 inc D cell
§8 - $210 inc NiMh cell pack

Email and payments to john (at) foxcourt (dot) co (dot) uk

Please don't use PM as I may not check mailbox so often.

First to post "I'll take it" buys the light subject to payment within 24 hours of post.

SALE-SALE-SALE-SALE
EASTER TREATS – LAST REDUCTIONS

Shipping cost unchanged.

NEW PRICES FROM 00.01 PST 11 April 2009
§3 - $195 light only, $235 inc D cell
§4 - $150 light only, $290 inc D cell
§5 - $240 light only, $275 inc D cell
§7 - $150 light only with standard head, $190 inc D cell
§7 - $185 light only with fluted head as pic, $225 inc D cell
§8 - $150 inc NiMh cell pack


 
Last edited:

plasmaman

Enlightened
Joined
Feb 25, 2006
Messages
383
Location
The boat house in Hereford, UK
Does the Mag focusing still work?

Can you post some beam shots?

Focusing - IMO there is only one focus point for a P7 - and these lights hit that spot. You can change focus as much as you want.
Beamshots - there are plenty of people who have done much better P7 beamshots than I will ever do on CPF - suggest you do a search. But outputwise these kick out a bit more than a WA1111 running flat out - so they are bright, and very usuable.
 
Last edited:

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Hi
Yes any D sized Lithium cell will fit. The D cells I use and am offering with the lights are 34mm diameter and 60mm long.
John

The Kai D cell is 65 mm long, 5mm longer than your D cell.
Some your flashlight looks like has a 2-3 mm gap between
tail cap & Body. Did you cut them too short?

If you barely fit your D, then the kai D will be too long?
 

Latest posts

Top