arek98
Enlightened
I see that second batch of JETBeam M1X is close and some people are asking for more info about this flashlight. I got one from first batch and below are few beamshots (sorry but writing reviews is not really my thing).
Light is really nice comparing to other flashlights I had in hands. I really like anodizing of JETBeam lights. I bought it with extender to run with 2 18650 Li-Ions. I think it could be little shorter. I have protected AW 18650 Li-Ions and they are little loose but ok (I can feel them move while shaking light). I also have AW IMR18650 and these are to short for this light (or should I rather say, light is to long). IMR18650 is about 2 mm shorter (it is 65mm long while AW protected 2200 mAh is 67mm).
I don't have another thrower to compare it with. Beam shots below are for M1X, JETBeam III Pro ST (XR-E Q5) and Quad Cree I made about two years ago (4 XR-E P4 with Shark driven at about 800mA, powered with 8 Eneloops in 2D Mag body).
Beamshots
f/4, 1/200s, distance to wall about 6ft
M1X
III pro ST
Quad
f/4, 1/160s, distance to wall about 6ft
M1X and III Pro St
M1X and Quad
f/2.8, 1/10s, distance to trees about 80ft
M1X
III Pro ST
Quad
Light is really nice comparing to other flashlights I had in hands. I really like anodizing of JETBeam lights. I bought it with extender to run with 2 18650 Li-Ions. I think it could be little shorter. I have protected AW 18650 Li-Ions and they are little loose but ok (I can feel them move while shaking light). I also have AW IMR18650 and these are to short for this light (or should I rather say, light is to long). IMR18650 is about 2 mm shorter (it is 65mm long while AW protected 2200 mAh is 67mm).
I don't have another thrower to compare it with. Beam shots below are for M1X, JETBeam III Pro ST (XR-E Q5) and Quad Cree I made about two years ago (4 XR-E P4 with Shark driven at about 800mA, powered with 8 Eneloops in 2D Mag body).
Beamshots
f/4, 1/200s, distance to wall about 6ft
M1X
III pro ST
Quad
f/4, 1/160s, distance to wall about 6ft
M1X and III Pro St
M1X and Quad
f/2.8, 1/10s, distance to trees about 80ft
M1X
III Pro ST
Quad