Hi,
so after I got the lux meter I decided to do some runtime charts... hope this is the way they should be done. lovecpf
First the Led Lenser P5 with a fully charged Duracell 2650mah Nimh:
Runtime to 50% was 113mins
Now the Nitecore D10 also with Duracell 2650mah and I also installed a termometer to read the surface temperature on the light.
Runtime to 50% was 75mins.
Room temperature was 22ºC ... light started at 23,2ºC and reached a max of 34,7ºC at 70mins.
Here is also both... regulated vs non regulated
Remember the Led Lenser is on Spot so it has a very high lux reading... but the light is "only" 65lumens vs 130 on the D10.
I really light the fact that after 2h I still have light to move around on a dark place... where the D10 after 75mins you have less then 10mins of light to "find the door" :naughty:
I also did some runtime readings on the MTE P7 and the NDI on li-ions... the MTE reached 43,5ºC after 25mins on high
Regards,
so after I got the lux meter I decided to do some runtime charts... hope this is the way they should be done. lovecpf
First the Led Lenser P5 with a fully charged Duracell 2650mah Nimh:
Runtime to 50% was 113mins
Now the Nitecore D10 also with Duracell 2650mah and I also installed a termometer to read the surface temperature on the light.
Runtime to 50% was 75mins.
Room temperature was 22ºC ... light started at 23,2ºC and reached a max of 34,7ºC at 70mins.
Here is also both... regulated vs non regulated
Remember the Led Lenser is on Spot so it has a very high lux reading... but the light is "only" 65lumens vs 130 on the D10.
I really light the fact that after 2h I still have light to move around on a dark place... where the D10 after 75mins you have less then 10mins of light to "find the door" :naughty:
I also did some runtime readings on the MTE P7 and the NDI on li-ions... the MTE reached 43,5ºC after 25mins on high
Regards,
Last edited: