Sold/Expired FS: P7 Modded Lights *Price Drops, New Light - Mag P7 1C*

FS: P7 Modded Lights *New light*

For Sale: P7 modded lights, test run only. These are not lights
from my collection. These lights are carefully made for you with quality
parts. I"ve been doing mods since I joined this forum over 6 years ago,
now I need to put my hobby to work to pay some bills.

New Light!

(6) P7 Mag 2C setup for one 18650 Li-Ion battery (not included).

Ready to run.
Includes:

Black or Pewter(if available) Mag-lite 2C host (new)

P7 LED DSWOI bin running direct drive, mounted w/Arctic Alumina epoxy.

Britelumens anodized heatsink, Arctic silver paste between sink and body.

Modified Mag reflector, original finish.

Mil-spec teflon wiring, hard wired to switch.

Gray plastic adapter sleeve for one 18650 battery (battery not included).
Sleeve is a light press fit in the tube and will not fall out, but it's
easily removable.

Spring for 18650 battery, soldered ground wire for lower resistance.

SOLD $75 shipped CONUS

(5) P7 Mag 1C setup for one 18650 Li-Ion battery (not included).

Ready to run.
Includes:

Black Mag-lite 2C host (new) cut and rethreaded to 1C size

P7 LED DSWOI bin running direct drive, mounted w/Arctic Alumina epoxy.

Britelumens anodized heatsink, Arctic silver paste between sink and body.

Modified Mag reflector, original finish.

Mil-spec teflon wiring, hard wired to switch.

Gray plastic adapter sleeve for one 18650 battery (battery not included).
Sleeve is a light press fit in the tube and will not fall out, but it's
easily removable.

Spring for 18650, soldered ground wire for lower resistance.

Sold


(4) P7 2D Mag, battery adapter and tailcap mod for 3 C-cell Nihm

batteries (not included).

Mag-lite blue 2D host, new.

P7 LED DSWOI bin running direct drive, mounted w/Arctic Alumina epoxy.

Britelumens prototype "deluxe" anodized heatsink, 2X the mass for
better heat dissipation. Arctic silver paste between sink and body.

Modified Mag reflector, original finish.

Mil-spec teflon wiring, hard wired to switch.

$100 WITHDRAWN shipped CONUS

(3) P7 Mag 2C setup for one 18650 Li-Ion battery (not included).

Ready to run.
Includes:

Black Mag-lite 2C host (new)

P7 LED DSWNJ bin running direct drive, mounted w/Arctic Alumina epoxy.

Litemania anodized heatsink, Arctic silver paste between sink and body.

Modified Mag reflector, original finish.

Mil-spec teflon wiring, hard wired to switch.

Gray plastic adapter sleeve for one 18650 battery (battery not included).
Sleeve is a light press fit in the tube and will not fall out, but it's
easily removable.

Spring for 18650, soldered ground wire for lower resistance.

$80 SOLDshipped CONUS


(2) P7 Mag for 3 D-cell Nihm batteries (not included), can run on

alkalines with reduced output.

Mag-lite black 3D host, almost new. It was opened and sat in a drawer, hardly used.

P7 LED DSWNJ bin running direct drive, mounted w/Arctic Alumina epoxy.

Litemania anodized heatsink, Arctic silver paste between sink and body.

Modified Mag reflector, original finish.

Mil-spec teflon wiring, hard wired to switch.

SOLD

(1) Like new River Rock 2C modded with a D-bin Seoul P7 and powered by one 18650 Li-Ion battery (battery not included).
The original reflector is modified to fit the P7 LED which is mounted on an
aluminum heatsink with Arctic Alumina epoxy and run by
direct drive. The 18650 battery fits perfectly in the provided adapter
sleeve. The sleeve is a light press fit in the tube and will not
fall out, but it's easily removable. The original spring has an extension to
reach the 18650 cell.

Light output in a ceiling bounce test is slightly less than a Mag 2C with a
direct drive P7, DX reflector and UCL lens. There is probably
some loss in output due to the heavy reflector texture and plastic lens. The
beam quality is very smooth with no clearly defined hotspot.
It's brighter in the middle and fades slightly to the edge somewhat like a
Surefire L4, but much brighter. An intense close up beam, but
not much throw, again, similar to an L4. There is no X or doughnut even at
one inch from a wall. After several minutes of running it gets
warm, but not too hot at the base of the head as long as you are
holding in your hand.

SOLD to Litefuse



P7 River Rock. The shed is about 60 ft. away.

P7 2C Mag-lite. All the light in the forground, the fence, and the tree on
the right is from the spill beam which looks a little brighter in person.

All lights include shipping to CONUS. Payment with Paypal (CC funding ok)
or USPS money order. Insurance is extra. International shipping might be

possible in some cases, PM me.

No trades please.

Availability:

Light #1 - Sold to Litefuse - Shipped
Light#2 - Sold to Waddup
Light#3 - Sold
Light#4 - Withdrawn
Light#5 - Sold to kavvika
Light#6 - Sold

Re: FS: P7 Modded Lights

BTTT

Price drop.

Re: FS: P7 Modded Mag-lites *PRICE DROP*

BTTT

Consolidated ads.

Re: FS: P7 Modded Mag-lites *PRICE DROP*

BTTT

Price drops.

Re: FS: P7 Modded Mag-lites *PRICE DROP*

Reduced

Re: FS: P7 Modded Mag-lites *PRICE DROP*

BTTT

Re: FS: P7 Modded Mag-lites *PRICE DROP*

BTTT

Re: FS: Three P7 Modded Lights *REDUCED*

Does #1 come with a glass lens? I like that you took the extra care to do the ground mod and the switch re-wiring for me.

Re: FS: Three P7 Modded Lights *REDUCED*

Sgt. LED said:

Does #1 come with a glass lens? I like that you took the extra care to do the ground mod and the switch re-wiring for me.

Click to expand...

Hi Sgt.,
No, sorry, they don't come with a glass lens. My plan is keep the price down for the basic light to make it affordable. An aftermarket lens or reflector is something that a person can add themselves later when they save up a few more bucks. It seemed to me that there were no quality mid-priced P7 lights between the $40 DX lights and the $150-$160 lights like the Fenix, EagleTac, etc. so I'm trying to fill that gap.

Another objective was to keep it simple, affordable and durable for Law Enforcement Officers. Right now I have a 2C/P7 light loaned out to a friend who's an LEO for him and his coworkers to test out.

If someone wanted a D2Flex driver, I could do that as an extra cost option.
I can also build lights to order in other configurations or colors like a 2D/3C mod.

Thanks for your interest and comment! :twothumbs

Re: FS: Three P7 Modded Lights *REDUCED*

kz1000s1 said:

My plan is keep the price down for the basic light to make it affordable. It seemed to me that there were no quality mid-priced P7 lights between the $40 DX lights and the $150-$160 lights like the Fenix, EagleTac, etc. so I'm trying to fill that gap.
Another objective was to keep it simple, affordable and durable for Law Enforcement Officers.
I can also build lights to order in other configurations or colors like a 2D/3C mod. :twothumbs

Click to expand...

A very good plan, higher quality than DX, lower cost the most CPF modders offer.
Blue and especially red hosts do sell faster on CPF but black and pewter are good work light colors.

Re: FS: Three P7 Modded Lights *REDUCED*

Bump

Re: FS: Three P7 Modded Lights *REDUCED*

I think these are nice mods at a good price point.

Is the RR P7 the same tint as the other two? That's the only light where you don't specify the bin code. I suppose that it could be just the weaker, more diffuse beam of the RR, but that shot of the shed looks greenish compared to the very white 2C shot below it, so that's why I'm wondering if it's the same emitter as the other two. Thanks!

Re: FS: Three P7 Modded Lights *REDUCED*

Thank you!

The River Rock has a DSWNJ just like the Maglite and they all came from the same batch.
In person it doesn't look green, it just isn't as bright because the beam is more diffused. Everything is lit evenly.

Here is a beamshot in another thread:
https://www.candlepowerforums.com/threads/229523

The wall in these photos is not white, it's a light tan. Also, the Maglite in these photos has a cooler bin than the ones in the sale.

The is likely to be the one and only River Rock 2C I will build unless there is more interest in it. Everyone keeps saying how much they love the "wall of light" from a Surefire L4, but this light has a much smoother beam with no doughnut hole and MUCH more output.

Re: FS: Three P7 Modded Lights *REDUCED*

Bump

Re: FS: Three P7 Modded Lights *REDUCED*

BTTT

Re: FS: Three P7 Modded Lights *REDUCED*

*New blue 2D/3C light with Britelumens prototype heatsink added*
Price drop on the River Rock P7.
Now just $55!

Re: FS: Four P7 Modded Lights *New Blue 2D/3C*

Could you possibly sell resistance fixed mag D switches?
I could use one and I don't want to "learn" with the only one I have on hand. I always destroy something the first go around.

If not then consider this a free bump back to page one instead of page four!

Re: FS: Four P7 Modded Lights *New Blue 2D/3C*

Hi again Sgt.!

Do you mean this mod for an incan?
https://www.candlepowerforums.com/threads/99710

Or just for the switch spring with an led?

Re: FS: Four P7 Modded Lights *New Blue 2D/3C*

It's for a Malkoff triple.

I am running it on 3 D alkaline and it can handle 9V so I figure I'd eliminate what resistance I could. The tailcap spring was simple the switch mod probably is too but like I said the first try is usually fatal.

Re: FS: Four P7 Modded Lights *New Blue 2D/3C*

River Rock P7- I'll take it.

Peter