donn_
Flashaholic
Individual parts now available!
Tubes and such!
Left-hand column, from the top:
Balrog 1x17670 tube...$50 + PPI
Balrog 1x17670 tube...$50 + PPI
JHanko 2x123 (snug 17670) tube...$40 + PPI
JHanko 2x123 (snug 17670) tube...$40 + PPI
Center column, from the top:
Dafabricata "Ribbed for your pleasure" E-head/C-tail 1x17670 tube...$70 + PPI
Unknown Ribbed 1x17670 tube...$45 + PPI
Right-hand column, from the top:
TnC Detonator 1x123 C-series extension...$50 + PPI
Note: All 17670 tubes will also take 2x123 cells.
===================================
A few Odds & Ends in bare aluminum.
TnC Parts are now available individually, exempt from the full light rules.
Center column, top to bottom:
TnC C-Flex/Mr.Bulk adaptor. Fits certain Mr. Bulk heads (including turbo head) to C-Flex tubes, using TnC canister. $45 + PPI
TnC C/Flex/SF adaptor. Fits TnC SF Series heads to C-Flex tubes, using TnC canisterss. $40 + PPI
Right-hand column, top to bottom:
TnC C-Flex AW C extension tube. $40 + PPI
TnC C-Flex AW C extension tube. $40 + PPI
========================================
First to post gets it.
I have disabled my PM, so please post questions here, or use my email/Paypal address, which is
===========================
GONE!
Left to right:
A special Aleph 3 head, containing an MC-E emitter in a 37mm LOP reflector. The converter is 3-stage, high/low/strobe, in that order. I moved the reflector and pill from the original cheap Chinese light, and press-fit it into the Aleph 3 head. Stock bezel ring.
Runs on a single Li-Ion cell, and I've used all of them successfully.
More information here:
https://www.candlepowerforums.com/threads/214125
$160 + PPI ***Withdrawn***
=============================================
A stock Aleph 3 head, with McR38 reflector and lens/o-ring. Stock bezel ring.
$125 + PPI***SOLD***
=============================================
Aleph 1 head with McR27 reflector and lens/o-ring. Stock bezel ring.
$75 + PPI ***SOLD***
=============================================
Aleph 19 head with McR19XR reflector and lens/o-ring. Black stock bezel ring.
$50 + PPI***SOLD***
=============================================
Aleph 2 head with McR20 reflector and lens/o-ring. Black stock bezel ring.
$65 + PPI***SOLD***
=============================================
Aleph Mule head with lens and both o-rings.
$42 + PPI***SOLD***
=============================================
Leef E-head/C-tail 1x18650 tube...$50 + PPI***SOLD***
Dafabricata "Ribbed for your pleasure" E-head/C-tail 1x123 tube...$70 + PPI***SOLD***
TranquillityBase Split-body 18650 tube...$75 + PPI***SOLD***
TranquillityBase Split-body 18650 tube...$75 + PPI***SOLD***
Aleph Flare 1x17670 tube...$45 + PPI***SOLD***
PEU Pineapple 1x17670 tube...$45 + PPI***SOLD***
McLux TK2003 1x17670 tube w/Ti clip #333...$75 + PPI ***SOLD***
Surefire Z48/9 C-series clicky...$50 + PPI***SOLD***
RPM C-series clicky ...$55 + PPI both ***SOLD***
McTC Clicky...$35 + PPI***SOLD***
McTC McE2S 2-stage ( 15 ohm)...$60 + PPI***SOLD***
TnC recessed E-series clicky..$40 + PPI***Withdrawn***
Aleph Bald clicky...$50 + PPI***SOLD***
Mr. Bulk turbo head for LionCub, Chameleon or Dragon. A lovely 2" Carley smooth reflector. Will also fit TnC C-Flex tubes with adaptor listed below. $75 + PPI***SOLD***
TnC 27mm head with ArcMania-built SSC P4 USWOH/Flupic 2.2 canister and King's Crown bezel ring (stock ring included). Also included is C-Flex adaptor. $200 + PPI***Withdrawn***
TnC C-Flex AW C tube with integrated clicky. $55 + PPI***Traded***
Balrog 1x17500 tube...$50 + PPI***SOLD***
Balrog 2-stage ( 30 ohm)...$45 + PPI***SOLD***
GanP C-series clicky...$65 + PPI***Withdrawn***
Last edited: