How to make a floodier beam Nitecore D10 Q5

victor01

Newly Enlightened
Joined
Jul 8, 2006
Messages
93
Location
Bangkok, Thailand
Hi. Is there anyway to make the Nitecore D10 Q5 beam more floodier, with more distributed beam profile and minimal hotspot? Expecting for some type of make chief cover or maybe optics applied to the front. Thanks.
 

scottaw

Enlightened
Joined
Apr 18, 2007
Messages
921
Location
State College, PA
I don't have a D10 personally to test, but i've found on a lot of my lights, if you can find a properly sized, clear water bottle lid, they work well. I have one that snaps tight on my novatac and makes a nice even flood.
 

PhantomPhoton

Flashlight Enthusiast
Joined
Jan 15, 2007
Messages
3,116
Location
NV
Or you could use scotch tape on the window, floods most lights up pretty well.
 

kaichu dento

Flashaholic
Joined
Apr 5, 2008
Messages
6,554
Location
現在の世界
Easy - sell it and get the GDP version.
Actually the beam of the GDP actually has about the same coverage, minus the ring around the outside, making it slightly smaller in overall coverage.

I would think the best way to do it would be to use an SSC P4, which would probably require a different reflector as well.
 
Last edited:
Top