Here's another project for my number one CPF buddy. He asked that I show enough detail on what was invloved in modding these so the owners can see. So this post will have a lot more pictures than usual from me although I forgot to take pictures of some the steps.
I was never a fan of these particular lights but after modding these I really like them now. Hope the owners enjoy! :wave:
-Mr Bulk Lion Cub
-SSC P7 DSWOI
-TaskLED Lion Cub/Lion Heart driver
-Aluminum heatsink
-Modified & sputtered McR-20
-Extra knurled head with heavier sputtering on the McR-20
-Glow orings in both heads
-2.7A with IMR16340
Here are pics of before the mod. It had already been upgraded with a Cree XR-E & had nice output.
After:
-Mr Bulk Chamelon
-SSC P7 DSWOI
-TaskLED Lion Cub/Lion Heart driver
-Aluminum heatsink
-20mm head with modified & sputtered McR-20 & glow oring
-27mm head with modified reflector
-52mm head with sputtered & smooth modified Mag reflectors
-Glow powder mod
-2.7A with IMR16340
Before (oops no pics of the 20mm head with the Luxeon ):
After:
And the hidden surprise:
More Pics:
These lights aren't grounded very well. The Lion Cub just relies on the negative lead of the LED touching the body for ground connection. The Chameleon driver pictured below just has a wire soldered to the driver that is bent flat that wedges between the driver & the body for ground connection. This Chameleon had flickering issues. I threaded a hole to use a screw for ground connection & epoxied it so it wouldn't come loose.
Every P7 I have used does not have a flat base, it's always concave. I sand the P7 flat & apply the thinest layer of epoxy I can to isolate it. See the silver in the middle? This pic was taken after I layed the thin layer of epoxy (yes it is there).
Custom made tool used to center the P7 (thanks to Anglepoise for the great idea!)
Sorry no beamshots, they are on the way back to their homes.
Thanks for viewing!
I was never a fan of these particular lights but after modding these I really like them now. Hope the owners enjoy! :wave:
-Mr Bulk Lion Cub
-SSC P7 DSWOI
-TaskLED Lion Cub/Lion Heart driver
-Aluminum heatsink
-Modified & sputtered McR-20
-Extra knurled head with heavier sputtering on the McR-20
-Glow orings in both heads
-2.7A with IMR16340
Here are pics of before the mod. It had already been upgraded with a Cree XR-E & had nice output.
After:
-Mr Bulk Chamelon
-SSC P7 DSWOI
-TaskLED Lion Cub/Lion Heart driver
-Aluminum heatsink
-20mm head with modified & sputtered McR-20 & glow oring
-27mm head with modified reflector
-52mm head with sputtered & smooth modified Mag reflectors
-Glow powder mod
-2.7A with IMR16340
Before (oops no pics of the 20mm head with the Luxeon ):
After:
And the hidden surprise:
More Pics:
These lights aren't grounded very well. The Lion Cub just relies on the negative lead of the LED touching the body for ground connection. The Chameleon driver pictured below just has a wire soldered to the driver that is bent flat that wedges between the driver & the body for ground connection. This Chameleon had flickering issues. I threaded a hole to use a screw for ground connection & epoxied it so it wouldn't come loose.
Every P7 I have used does not have a flat base, it's always concave. I sand the P7 flat & apply the thinest layer of epoxy I can to isolate it. See the silver in the middle? This pic was taken after I layed the thin layer of epoxy (yes it is there).
Custom made tool used to center the P7 (thanks to Anglepoise for the great idea!)
Sorry no beamshots, they are on the way back to their homes.
Thanks for viewing!
Last edited: