• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired FS: Barbolight U-04 SE Q5

grinsefalle

Enlightened
Joined
Aug 18, 2006
Messages
200
Location
Germany/Bavaria
This sweetie has to go: Barbolight U-04 Special Edition Cree Q5

* from a small, limited edition
* uses a Cree Q5 LED
* 2x CR123 or 1x 18650 LiIo rechargeable
* 900mA to the LED, regulated, after 150min you still have 70% light
* 5mm Makrolon front window
* tactical tailcap switch: press for momentary on, twist for constant on
* sandblasted Ti-clip
* 200m waterproof IP68M, shockproof MilStd 810. A real diving flashlight!
* the special finish: 7075 T651 alloy with HA III penetrated with Teflon Mil-A-63576 Type I (Soft green)

This finish is hard to work with, the U-04 was hand-made. The finish is not perfect, it has some small dark spots and flaws. This is the case on all Barbo SE's, it is not a big issue.

I'm sorry to tell, that this Barbo has 2 dings, one on the head and one on the tailcap. My sweetie dropped to the stone floor... :(

On the pics you can see the dings and one anodizing flaw at the tailcap.

The finish is really beautiful, it shines golden with a touch of green, very nice to look at it :wow:


You get:
1x Barbolight U-04 SE
1x padded ziplock bag
1x Nylon-Holster

220 USD with paypal + shipping. You can make me an offer, too.

I will ship internationally, please contact me for shipping quote (shipping to USA with tracking an insurance could be quite expensive..)




thanks for looking!
regards from Germany
Michael
 
Last edited:

Gary123

Enlightened
Joined
Jan 5, 2007
Messages
856
Location
Washington DC area
Can you tell me the diameter of the reflector in this? Would a Mag sized reflector fit in here? I would plan on modding this if I got it.

Thanks
 

grinsefalle

Enlightened
Joined
Aug 18, 2006
Messages
200
Location
Germany/Bavaria
Can you tell me the diameter of the reflector in this? Would a Mag sized reflector fit in here? I would plan on modding this if I got it.

Thanks

Hi!

A reflector of a C or D-sized Mag will not fit inside the Barbolight.
The head is 34mm in diameter, the reflector 27mm at the widest opening (I cannot open the head, so this could be 1mm +-, the length of the reflector is unknown).

Just ask, if there are more questions!

Michael
 
Top