LED Zeppelin
Flashlight Enthusiast
The two halves of the module before final assembly:
Completed module:
Installed in a light:
All pictures are of the actual module for sale. The contact piece of this module is bare alum, not gold chromate as you can see in the first pic.
Hardware:
- MZMC-3 heatsink, new design specific for the MC-E/McR27S
- (3) MC-E M WD
- (3) modified McR27S reflectors
- Shark Buck 3A/Remora (non-SOS)
Will run on:
11.1V: 3X17670 in FM holder, 3 X 18650 in Megalennium
18.0V: 6 X CR123 in FM 3 X 17670 holder
22.2V: 6 X RCR123 in FM 3 X 17670 holder, 6 X 17500 in Petrev's holder
Related info in the MZ master thread, MZMC-3 development thread, and a sales thread of a similar module.
**Withdrawn** $395 installed plus shipping.
Note that only the module is included, no head. Installation included into a KT4 the buyer sends me, all stock parts are returned. I can provide a used KT4 at an additional cost of approx. $110 - 125 depending on condition.
Completed module:
Installed in a light:
All pictures are of the actual module for sale. The contact piece of this module is bare alum, not gold chromate as you can see in the first pic.
Hardware:
- MZMC-3 heatsink, new design specific for the MC-E/McR27S
- (3) MC-E M WD
- (3) modified McR27S reflectors
- Shark Buck 3A/Remora (non-SOS)
Will run on:
11.1V: 3X17670 in FM holder, 3 X 18650 in Megalennium
18.0V: 6 X CR123 in FM 3 X 17670 holder
22.2V: 6 X RCR123 in FM 3 X 17670 holder, 6 X 17500 in Petrev's holder
Related info in the MZ master thread, MZMC-3 development thread, and a sales thread of a similar module.
**Withdrawn** $395 installed plus shipping.
Note that only the module is included, no head. Installation included into a KT4 the buyer sends me, all stock parts are returned. I can provide a used KT4 at an additional cost of approx. $110 - 125 depending on condition.
Last edited: