• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired WITHDRAWN

Status
Not open for further replies.

Metatron

Banned
Joined
Jun 18, 2008
Messages
876
Location
perths lightening swamp
dsc1330mk4.jpg


Hardware:

- HA black 1 C Mag, tailcap bored for shorter length
- (2) Sharks in parallel
- (2) SharkSink C, HA natural
- Shark topside micro heatsinks on IC and diode
- (1) 20K ohm log pot
- HA black LZ pot knob w/ trit vial indicator
- (4) Cree Q5 WG
- PXR19-C heatsink, HA black
- (3) McR19XR w/ MirageMan centering rings
- (1) 18mm X 6mm back focal length AR coated aspheric lens
- (1) custom lens holder physically interchangeable w/ McR19XR
- (3) trit vials installed under aspheric
- UCL lens
Specs:

- Powered by 1 AW Li-ion C cell
- Sharks are wired in parallel, each driving (2) Crees
- Vf or LED pairs ~ 6.9 V @ 350 mA
- Current pot-adjustable from 0 - 650 mA (knob rotation mechanically limited)
- Cell draw 3.4 A on hi, fully charged cell
- Runtime 45 - 55 minutes on hi
- Measures ~ 13,000 lux @ 1m on hi



not responsible for loss or damage after this gem has left my care

thanks for looking folks!
 
Last edited:

griff

Flashlight Enthusiast
Joined
Mar 22, 2007
Messages
1,917
Location
Kansas
Re: FS: Quad Cree 1C Mag with aspheric/reflector combo

Nice Steve!!
Good luck Mate!
 

LED Zeppelin

Flashlight Enthusiast
Joined
Sep 14, 2005
Messages
1,876
Location
Great Lakes
Re: FS: Quad Cree 1C Mag with aspheric/reflector combo

Here's a full pictorial on this light.

If you look closely at the pot shaft in the pic below, you can see a small rollpin to the left of the shaft, slipped into a hole drilled into the tube. This pin rides the slot on the underside of the knob.

The pin limits rotation of the knob to keep the current in line with what the AW C cell can deliver. If using a high current cell, the pin can be pulled for full pot rotation and LED current of near 1A.



Lots to fit in a C tube:



There are 3 green trits under the aspheric lens:



Another trit in the knob:



Next to a 2C Mag:

 

warx23

Enlightened
Joined
May 16, 2007
Messages
469
Re: FS: Quad Cree 1C Mag with aspheric/reflector combo

Great looking light! :thumbsup: Those aspherics you make are most excellent.

if Griff didnt just extract all my extra $$ Id be on this one.

Good luck sir.
 

griff

Flashlight Enthusiast
Joined
Mar 22, 2007
Messages
1,917
Location
Kansas
Re: FS: Quad Cree 1C Mag with aspheric/reflector combo

Any beamshots???
 

griff

Flashlight Enthusiast
Joined
Mar 22, 2007
Messages
1,917
Location
Kansas
Re: WTT: LZ's Quad 1C with aspheric FOR Black Griffen/ ME II rcr

I have a Black Griffin but not a Black Griffen:devil:
 

GryphonQ

Newly Enlightened
Joined
Jan 17, 2009
Messages
148
Re: WTT: LZ's Quad 1C with aspheric FOR Black Griffen/ ME II rcr

I was out of town when this was posted. I might be interested, depending on price. If you still want to sell it, please PM/email me with that info. I'd need to figure out where to get an AW-C cell and charger...

Thanks! RG
 
Status
Not open for further replies.

Latest posts

Top