jtivat
Flashlight Enthusiast
I took my Surge diving this weekend, we went to about 62' and it worked great. After the dive I noticed the batteries were running low so I changed them, now it is working intermittently. Any ideas?
Surge not working
- Thread starter jtivat
- Start date
Help Support Candle Power Flashlight Forum
this_is_nascar
Flashaholic
Any signs of moisture inside?
jtivat
Flashlight Enthusiast
Nope all was dry.
Size15's
Flashaholic
Still, it can't hurt leave it open in the airing cupboard over night and try it again in the morning.
Try switching on the battery module with it out of the body by pressing and holding the little microswitch. Still intermittent?
Al
Try switching on the battery module with it out of the body by pressing and holding the little microswitch. Still intermittent?
Al
Make sure you put the batteries in correctly. They don't go in "logically". Some of the spring contacts are backwards so be sure to go by the markings. Check the bulb to, it might be loose.
When I got my Surge (used) it had a battery in backwards.
When I got my Surge (used) it had a battery in backwards.
jtivat
Flashlight Enthusiast
Thanks for all the suggestions I believe it was a battery contact one of them was really compressed.
