(Continued from: 1st~3rd batch)
Nov.17 Updated: 6th batch ready. I reserved some and will PM who posted interests. Thanks.
Oct. 23 Updated: There's some delay for ordering needed parts. New batch should be ready in early November. Thanks.
Oct.7 Updated: ALL SOLD. Thanks.
Oct.6 Updated: I've release switches that were reserved for one CPFer. They're the last for this batch.
Oct.1 updated: The reseller of the core switch sold me a few switches with the old price and I made a small batch. Some sold to CPFers who PM me previously and I put the rest for sale. Next time I need to order a large batch to keep the same price. Thus, there's no promise for next batch at this moment. Thanks.
For sale: custom made forward-clicky switch for Surefire 6P/G2 and similar.
I didn't have many SF tailcap to test. My friend told me it fits P/G/C/Z tailcap and L5/L6/M2/M3/M4. The clicky feel is similar to SF clicky. Switch is rated 3A max, please make sure your application won't exceed the limit. Switch manufacturer said over-current for extended period will cause the internal spring to deform and damaged the switch permanently.
Each set comes with one switch and one rubber cap. The retaining ring is made from brass. The switch is forward-clicky type, half press to momentary on and full click to constant on.
I have 0 sets left now. (ALL SOLD)
Price: US$15.5 each
Shipping: US$2.5 for first one, add $0.5 for each additional.
They will be shipped worldwide via registered airmail. Trackable but not insured. Shipping with insurance is optional at buyer's expense. I couldn't be responsible for item lost or damage in transit if not insured. If you want insurance, please let me know your country and I'll figure out if it's available and the additional charge.
I accept PayPal payment only. No eCheck payment since it'll need over one month to clear. Here's my PayPal address (No PP fees):
cc @ miyu . tw
(please remove the spaces)
*If you're using bank funded payment or PayPal cash/balance*, please choose "Personal Payment" and include your shipping info in the PayPal note or PM me your address. If PayPal want to charge you fees, don't check "I'll pay the fee" and I'll pay the fees.
Please remember to include you CPF ID and quantity in PayPal note.
Thanks.
==============================================
Here's the install instruction:
1. Prepare your tailcap (G2 for example) and the switch
2. Pull out the spring first.
3. Use plier to pull out the core.
4. Use plier or tweezer to unscrew the retaining ring. (some tailcap is glued). Take out the retaining ring and original rubber cap.
5. Put the new rubber cap in the tailcap
6. Use needle point piler or tweezer to screw tight the retaining ring.
If it's hex screw (not rivet) in your tailcap. You could use a plier(or extension tube) to hold the core and unscrew it with a hex wrench. The thread is seperate in two sections. Install the new switch and screw the retaining ring further, it'll still works.
If your tailcap is old type with large rubber cap. The switch won't work!
Here's some photos of tailcap tested okay by my friend:
==== 4th batch ====
order list:
marcoc, 1 pcs, Payment received, shipped on 7/8
lightdog, 1 pcs, Payment received, shipped on 7/9
Roadhog, 6 pcs, Payment received, shipped on 7/9
blitzlicht65, 2 pcs, Payment received, shipped on 7/9
Winx, 2 pcs, Payment received, shipped on 7/9
PoliceScannerMan, 2 pcs, Payment received, shipped on 7/10
RichS, 1 pcs, Payment received, shipped on 7/10
KevinL, 3 pcs, Payment received, shipped on 7/13
saltytri, 3 pcs, Payment received, shipped on 7/13
bzstylez, 1 pcs, Payment received, shipped on 7/25
G Man, 4 pcs, Payment received, shipped on 7/28
Bullet Bob, 1 pcs, Payment received, shipped on 7/29
Lumilo, 2 pcs, Payment received, shipped on 8/18
gallonoffuel, 3 pcs, Payment received, shipped on 8/22
yuk, 2 pcs, Payment received, shipped on 8/26
smopoim86, 1 pcs, Payment received, shipped on 8/27
evilive138, 1 pcs, Payment received, shipped on 8/27
mattgo, 2 pcs, Payment received, shipped on 8/28
Dutch, 1 pcs, Payment received, shipped on 8/29
ElectronGuru, 7 pcs, Payment received, shipped on 8/31
==== 5th batch ====
order list:
TRDmatrix, 2 pcs, Payment received, Shipped on 10/2
Moddoo, 4 pcs, Payment received, Shipped on 10/2
icaruz, 1 pcs, Payment received, Shipped on 10/2
darkzero, 1 pcs, Payment received, Shipped on 10/2
nfetterly, 1 pcs, Payment received, Shipped on 10/2
jp2515, 1 pcs, Payment received, Shipped on 10/12
blitzlicht65, 2 pcs, Payment received, Shipped on 10/7
==== 6th batch Reservation List ====
leukos, 2 pcs reserved
shark_za, 2 pcs reserved
Lumilo, 2 pcs reserved
^^Nova^^, 2 pcs reserved
bugsy714, 1 pcs reserved
TRDmatrix, 2 pcs reserved
wpowell, 2 pcs reserved
jnr4817, 3 pcs reserved
Speedball, 2 pcs reserved
PCC, 2 pcs reserved
KAP, 2 pcs reserved
Nov.17 Updated: 6th batch ready. I reserved some and will PM who posted interests. Thanks.
Oct. 23 Updated: There's some delay for ordering needed parts. New batch should be ready in early November. Thanks.
Oct.7 Updated: ALL SOLD. Thanks.
Oct.6 Updated: I've release switches that were reserved for one CPFer. They're the last for this batch.
Oct.1 updated: The reseller of the core switch sold me a few switches with the old price and I made a small batch. Some sold to CPFers who PM me previously and I put the rest for sale. Next time I need to order a large batch to keep the same price. Thus, there's no promise for next batch at this moment. Thanks.
For sale: custom made forward-clicky switch for Surefire 6P/G2 and similar.
I didn't have many SF tailcap to test. My friend told me it fits P/G/C/Z tailcap and L5/L6/M2/M3/M4. The clicky feel is similar to SF clicky. Switch is rated 3A max, please make sure your application won't exceed the limit. Switch manufacturer said over-current for extended period will cause the internal spring to deform and damaged the switch permanently.
Each set comes with one switch and one rubber cap. The retaining ring is made from brass. The switch is forward-clicky type, half press to momentary on and full click to constant on.
I have 0 sets left now. (ALL SOLD)
Price: US$15.5 each
Shipping: US$2.5 for first one, add $0.5 for each additional.
They will be shipped worldwide via registered airmail. Trackable but not insured. Shipping with insurance is optional at buyer's expense. I couldn't be responsible for item lost or damage in transit if not insured. If you want insurance, please let me know your country and I'll figure out if it's available and the additional charge.
I accept PayPal payment only. No eCheck payment since it'll need over one month to clear. Here's my PayPal address (No PP fees):
cc @ miyu . tw
(please remove the spaces)
*If you're using bank funded payment or PayPal cash/balance*, please choose "Personal Payment" and include your shipping info in the PayPal note or PM me your address. If PayPal want to charge you fees, don't check "I'll pay the fee" and I'll pay the fees.
Please remember to include you CPF ID and quantity in PayPal note.
Thanks.
==============================================
Here's the install instruction:
1. Prepare your tailcap (G2 for example) and the switch
2. Pull out the spring first.
3. Use plier to pull out the core.
4. Use plier or tweezer to unscrew the retaining ring. (some tailcap is glued). Take out the retaining ring and original rubber cap.
5. Put the new rubber cap in the tailcap
6. Use needle point piler or tweezer to screw tight the retaining ring.
If it's hex screw (not rivet) in your tailcap. You could use a plier(or extension tube) to hold the core and unscrew it with a hex wrench. The thread is seperate in two sections. Install the new switch and screw the retaining ring further, it'll still works.
If your tailcap is old type with large rubber cap. The switch won't work!
Here's some photos of tailcap tested okay by my friend:
==== 4th batch ====
order list:
marcoc, 1 pcs, Payment received, shipped on 7/8
lightdog, 1 pcs, Payment received, shipped on 7/9
Roadhog, 6 pcs, Payment received, shipped on 7/9
blitzlicht65, 2 pcs, Payment received, shipped on 7/9
Winx, 2 pcs, Payment received, shipped on 7/9
PoliceScannerMan, 2 pcs, Payment received, shipped on 7/10
RichS, 1 pcs, Payment received, shipped on 7/10
KevinL, 3 pcs, Payment received, shipped on 7/13
saltytri, 3 pcs, Payment received, shipped on 7/13
bzstylez, 1 pcs, Payment received, shipped on 7/25
G Man, 4 pcs, Payment received, shipped on 7/28
Bullet Bob, 1 pcs, Payment received, shipped on 7/29
Lumilo, 2 pcs, Payment received, shipped on 8/18
gallonoffuel, 3 pcs, Payment received, shipped on 8/22
yuk, 2 pcs, Payment received, shipped on 8/26
smopoim86, 1 pcs, Payment received, shipped on 8/27
evilive138, 1 pcs, Payment received, shipped on 8/27
mattgo, 2 pcs, Payment received, shipped on 8/28
Dutch, 1 pcs, Payment received, shipped on 8/29
ElectronGuru, 7 pcs, Payment received, shipped on 8/31
==== 5th batch ====
order list:
TRDmatrix, 2 pcs, Payment received, Shipped on 10/2
Moddoo, 4 pcs, Payment received, Shipped on 10/2
icaruz, 1 pcs, Payment received, Shipped on 10/2
darkzero, 1 pcs, Payment received, Shipped on 10/2
nfetterly, 1 pcs, Payment received, Shipped on 10/2
jp2515, 1 pcs, Payment received, Shipped on 10/12
blitzlicht65, 2 pcs, Payment received, Shipped on 10/7
==== 6th batch Reservation List ====
leukos, 2 pcs reserved
shark_za, 2 pcs reserved
Lumilo, 2 pcs reserved
^^Nova^^, 2 pcs reserved
bugsy714, 1 pcs reserved
TRDmatrix, 2 pcs reserved
wpowell, 2 pcs reserved
jnr4817, 3 pcs reserved
Speedball, 2 pcs reserved
PCC, 2 pcs reserved
KAP, 2 pcs reserved
Last edited: