P60 flashlight list question

I was looking through the P60 flashlight list and I was wondering which ones are the small and lightweight ones?

Also do I understand correctly that fenix has no p60 models?

Nobody?

The smallest P60 lights are the CR123 type.

1. Surefire 3P= 3.9in
2. Surefire 3P Parts = 3.25in = This is the Smallest I have and with a Dereelight R2 it is the lightest, but I rather have an M30 eventhough its heavier.
3. Solarforce L2m = 3.90in

There are more, but these are the ones I remember.

Now with the Malkoff E-Series bezel then

1. E1E plus Malkoff E-Series bezel = you could fit any Malkoff P60 drop-in. Others from Dereelight and DX will not fit.

2. Aleph CR2 body plus E twistie and Malkoff E-series bezel

Good luck,
Jose

Correct, no P60 hosts from Fenix.

With P60 hosts, one of the smallest (shortest) would be the Solarforce L2M, which takes a single 16340 cell.

I only have Solarforce L2/Spiderfire X-03 18650 capable P60 hosts so I can't provide much feedback on other full sized P60 hosts that might be smaller.

The head of the P60 hosts will more or less be the same since they have to accomodate the standard sized P60 drop-ins.

Here is the smallest I have






Here are more 3P Parts..

It'll get a little complicated if you want something smaller than the L2M or 6P...that would be running any of surefire/vital gear bodies through a E2C adapter and use a C bezel...

although it would look a little odd

Illum said:

It'll get a little complicated if you want something smaller than the L2M or 6P...that would be running any of surefire/vital gear bodies through a E2C adapter and use a C bezel...

although it would look a little odd

Click to expand...

No more E to C adaptors for me. Just get the Malkoff E series bezel which screws on directly to any E-series Surefire and Aleph body and accepts P60 drop-ins with reflectors 25mm size like the M60 variants.


Good bye E to C adaptors:wave:

bigchelis said:

Here is the smallest I have

Here are more 3P Parts..

Click to expand...

lol

is there an extension that would fit on an M2?

E2C adapter with a C2M adapter :thinking:

people have had KT2s on E1es so I know its possible

The C to M adaptors are sold at lumensfactory.com and allow you to install a KT-4 bezel like the one on my Surefire M6 on any C series hosts.


Here is the link..It is called the M adaptor and only comes in one color

http://www.lumensfactory.com/cart.php?cat_id=11&sub_cat_id=9

Now I can install my KT-4 bezel on my Surefire 3P Parts.

Why would you consider it and how could you get the springs on the MN lamps to fit?