LF2XT -- Deprogramming

torpeau

Newly Enlightened
Joined
Jul 26, 2008
Messages
108
Location
Left Coast of FL
I have two of these, but apparently I accidentally programmed my first one so that it doesn't ramp up and down. 1C and it's on at 50%, PH and it's 100%, 2C and it's at .2%, each 2C moves it to another brightness or flashing mode.

How do I return it to the basic CUI? I think the manual says 5C+ PH, but that doesn't seem to work for me.
 

Zeruel

Flashlight Enthusiast
Joined
Jan 1, 2009
Messages
3,286
Location
SIN
Go to FUI mode and restore to factory setting. Use this flowchart.

In another words, 5C + PH then 10C +PH.
 

Beacon of Light

Flashlight Enthusiast
Joined
Dec 9, 2005
Messages
2,054
I still have trouble with PH. So when it is 5C +PH is it really just 6C but don't release on the 6th C? Or is it 5C :wait 2 seconds: then press and hold?

Also I thought Factory Reset is 10C + PH, not sure why you mentioned 5C+ PH first...
 

Zeruel

Flashlight Enthusiast
Joined
Jan 1, 2009
Messages
3,286
Location
SIN
I still have trouble with PH. So when it is 5C +PH is it really just 6C but don't release on the 6th C? Or is it 5C :wait 2 seconds: then press and hold?

Also I thought Factory Reset is 10C + PH, not sure why you mentioned 5C+ PH first...

PH = Press and hold. So, 5C + PH = on the sixth click, don't release.

Factory reset IS 10C + PH as I've mentioned, but you got to go into FUI first to activate reset. To go into FUI mode, it's 5C + PH. THEN you do the 10C + PH.

Get it? ;)
 
Top