wquiles
Flashaholic
******************************************************
Thread closed
******************************************************
July 27, 2011
Announcement.
I am still traveling a lot with my day job, so I will be closing this thread, and stop offering 1xD's in the short term so that I can work on my MagnetoDrive concept/project. I will open a new thread when I have more to show. Thanks again for all of the support and business, and I hope to offer 1xD's again in the future. In the meantime, please contact Jesus Hernandez, and others here in the forums for your Mag-related needs.
As always I am just an email away (in my signature), but keep in mind that with my frequent travel I might be a little bit slow in answering back.
Will
******************************************************
Thread closed
******************************************************
Prices for these 1xD's (which include shipping):
Any color: $60 domestic, $70 international
Extra services:
- Internal boring for 4xAA battery adapters is an extra $30
- Body/head grooving: $35 each
- Modify stock switch to work with flat cells (and optionally cut tower off) = $20
- Custom Battery Sleeves Delrin/Aluminum = $45 each
Options for using the 18650 cell in the "D" size body:
(deep tailcap mod allows for the overall length of the body to be shorter)
- Deep tailcap mod with Al plug for 18650 cell (no Delrin sleeve) = $40
- Delrin sleeve for 18650 cell and Al spring plug (no deep tailcap mod) = $40
- Deep tailcap mod with Delrin spacer and Al plug for 18650 cell (all included) = $55
- Deep tailcap mod by itself - $25
- Delrin sleeve for 18650 cell by itself = $20
- Al spring plug by itself = $20
I can cut the body as short as possible if you let me know what cell or battery back (3xAA, 4xAA, LiIon D, 18650, etc.) it will be used for.
Product/project collaboration:
- 3xAA and other adapters can be bought from forum member mdocod (Eric) here:Battery Adapters ...
- If you are interested in the 4xAA or 4x14670 adapters, you should contact forum member fivemega.
- If you are interested in a turn-key 1xD light using the SST-50/90 LED's, I recommend that you contact forum member Nailbender . You can still buy the 1xD from me and then I will mail your host directly to David for him to finish it, and ship it directly to you.
- Due to project load and family/work needs, I am not always able to take on all new projects. For additional machining and/or complete lights, I recommend that you contact forum members (this is not meant to be a complete list) LED Zeppelin , darkzero , cmacclel , or Mirage_Man .
* Please note new international shipping changes in this post as I will no longer be able to use FedEx to ship international packages.
Will
***********************************************************************************
Updated list - Sept 30th, 2010:
Nova - International - PAID!
- Red 2D incan
- Tailcap mod with Spring plug
- Top and tail the switch
DONE=> ZanZan - International - PAID! - DONE! - SHIPPED!
- 1xD, Black, cut for 18650 cell - international
- Deep tailcap mod with Delrin spacer and Al plug for 18650 cell (all included)
Will
***********************************************************************************************************************
With these 1xD's you can build anything from a simple LED mod, to a VERY bright light like this one using the SST-90 LED:
Mag 1D SST-90 at about 2250 lumens built ...
***********************************************************************************************************************
Since I get asked often how much do I charge for a turn-key 1xD with a P7 emiter, , here is how much I charge for my two most popular configurations, using a 3xAA adapter from mdocod, or using a single 18650 cell:
The detailed cost for a turn-key 1xD with a P7, using a 3xAA adapter are:
- 1xD Host cut/re-thread in any color ($60 domestic - this includes shipping)
- P7 LED $30
- P7 heatsink $20 (order these from Asia - about a 3 week wait)
- deep tailcap mod $25
- mdocod 3xAA adapter $25 (I order these from forum member Eric, aka mdocod)
- assembly, labor, misc supplies (epoxy, Al, Delrin, cables, etc.) $60
- cut/modify switch for flat cells and LED wiring - free
Total with shipping = $220 (domestic)
Total with shipping = $230 (international with tracking #)
The detailed cost for a turn-key 1xD with a P7, using a single 18650 cell are:
- 1xD Host cut/re-thread in any color ($60 domestic - this includes shipping)
- P7 LED $30
- P7 heatsink $20 (order these from Asia - about a 3 week wait)
- Deep tailcap mod with Delrin spacer and Al plug for 18650 cell (all included) = $55
- assembly, labor, misc supplies (epoxy, Al, Delrin, cables, etc.) $60
- cut/modify switch for flat cells and LED wiring - free
Total with shipping = $225 (domestic)
Total with shipping = $235 (international with tracking #)
Often asked options:
- Head, body grooving is extra at $35 each
Because the P7 heatsink comes from Asia, most orders will take at least 3 weeks before I can get started. Sometimes I will have one heatsink on hand, and in that case, a build would take considerably less.
***********************************************************************************************************************
A few samples of colors that I can get:
(from left to right: Digital CAMO, Digital CAMO, Dark Silver, Regular CAMO, Silver)
(from left to right: Silver, Silver, Copper, Copper, Dark Green, Dark Green)
(from left to right: Dark Green, Dark Green, Purple, Blue)
(from left to right: Blue, Jade Green, Digital Camo, Digital Camo)
Body grooving:
Modify stock switch to work with flat cells (extra charge):
I can also do the other side (included in the extra charge) if you are using it for an LED mod and don't need the bulb pedestal:
Inside boring (extra) to allow for 4xAA battery holder such as this one:
This is how the inside of the body looks after the boring operation:
I also make custom battery sleeves for "C" and 18650 cells (extra charge). Here are some battery/holders for comparison size-wise. From top: "C" cell, FM 4xAA holder, WQ's custom 18650 LiIon holder, FM's 4x14670 holder:
Here is a size comparison of the 3 battery holders (top: WQ's 18650 holder, WQ's AW "C" holder, FM's 4xAA holder)
Thread closed
******************************************************
July 27, 2011
Announcement.
I am still traveling a lot with my day job, so I will be closing this thread, and stop offering 1xD's in the short term so that I can work on my MagnetoDrive concept/project. I will open a new thread when I have more to show. Thanks again for all of the support and business, and I hope to offer 1xD's again in the future. In the meantime, please contact Jesus Hernandez, and others here in the forums for your Mag-related needs.
As always I am just an email away (in my signature), but keep in mind that with my frequent travel I might be a little bit slow in answering back.
Will
******************************************************
Thread closed
******************************************************
Prices for these 1xD's (which include shipping):
Any color: $60 domestic, $70 international
Extra services:
- Internal boring for 4xAA battery adapters is an extra $30
- Body/head grooving: $35 each
- Modify stock switch to work with flat cells (and optionally cut tower off) = $20
- Custom Battery Sleeves Delrin/Aluminum = $45 each
Options for using the 18650 cell in the "D" size body:
(deep tailcap mod allows for the overall length of the body to be shorter)
- Deep tailcap mod with Al plug for 18650 cell (no Delrin sleeve) = $40
- Delrin sleeve for 18650 cell and Al spring plug (no deep tailcap mod) = $40
- Deep tailcap mod with Delrin spacer and Al plug for 18650 cell (all included) = $55
- Deep tailcap mod by itself - $25
- Delrin sleeve for 18650 cell by itself = $20
- Al spring plug by itself = $20
I can cut the body as short as possible if you let me know what cell or battery back (3xAA, 4xAA, LiIon D, 18650, etc.) it will be used for.
Product/project collaboration:
- 3xAA and other adapters can be bought from forum member mdocod (Eric) here:Battery Adapters ...
- If you are interested in the 4xAA or 4x14670 adapters, you should contact forum member fivemega.
- If you are interested in a turn-key 1xD light using the SST-50/90 LED's, I recommend that you contact forum member Nailbender . You can still buy the 1xD from me and then I will mail your host directly to David for him to finish it, and ship it directly to you.
- Due to project load and family/work needs, I am not always able to take on all new projects. For additional machining and/or complete lights, I recommend that you contact forum members (this is not meant to be a complete list) LED Zeppelin , darkzero , cmacclel , or Mirage_Man .
* Please note new international shipping changes in this post as I will no longer be able to use FedEx to ship international packages.
Will
***********************************************************************************
Updated list - Sept 30th, 2010:
Nova - International - PAID!
- Red 2D incan
- Tailcap mod with Spring plug
- Top and tail the switch
DONE=> ZanZan - International - PAID! - DONE! - SHIPPED!
- 1xD, Black, cut for 18650 cell - international
- Deep tailcap mod with Delrin spacer and Al plug for 18650 cell (all included)
Will
***********************************************************************************************************************
With these 1xD's you can build anything from a simple LED mod, to a VERY bright light like this one using the SST-90 LED:
Mag 1D SST-90 at about 2250 lumens built ...
***********************************************************************************************************************
Since I get asked often how much do I charge for a turn-key 1xD with a P7 emiter, , here is how much I charge for my two most popular configurations, using a 3xAA adapter from mdocod, or using a single 18650 cell:
The detailed cost for a turn-key 1xD with a P7, using a 3xAA adapter are:
- 1xD Host cut/re-thread in any color ($60 domestic - this includes shipping)
- P7 LED $30
- P7 heatsink $20 (order these from Asia - about a 3 week wait)
- deep tailcap mod $25
- mdocod 3xAA adapter $25 (I order these from forum member Eric, aka mdocod)
- assembly, labor, misc supplies (epoxy, Al, Delrin, cables, etc.) $60
- cut/modify switch for flat cells and LED wiring - free
Total with shipping = $220 (domestic)
Total with shipping = $230 (international with tracking #)
The detailed cost for a turn-key 1xD with a P7, using a single 18650 cell are:
- 1xD Host cut/re-thread in any color ($60 domestic - this includes shipping)
- P7 LED $30
- P7 heatsink $20 (order these from Asia - about a 3 week wait)
- Deep tailcap mod with Delrin spacer and Al plug for 18650 cell (all included) = $55
- assembly, labor, misc supplies (epoxy, Al, Delrin, cables, etc.) $60
- cut/modify switch for flat cells and LED wiring - free
Total with shipping = $225 (domestic)
Total with shipping = $235 (international with tracking #)
Often asked options:
- Head, body grooving is extra at $35 each
Because the P7 heatsink comes from Asia, most orders will take at least 3 weeks before I can get started. Sometimes I will have one heatsink on hand, and in that case, a build would take considerably less.
***********************************************************************************************************************
A few samples of colors that I can get:
(from left to right: Digital CAMO, Digital CAMO, Dark Silver, Regular CAMO, Silver)
(from left to right: Silver, Silver, Copper, Copper, Dark Green, Dark Green)
(from left to right: Dark Green, Dark Green, Purple, Blue)
(from left to right: Blue, Jade Green, Digital Camo, Digital Camo)
Body grooving:
Modify stock switch to work with flat cells (extra charge):
I can also do the other side (included in the extra charge) if you are using it for an LED mod and don't need the bulb pedestal:
Inside boring (extra) to allow for 4xAA battery holder such as this one:
This is how the inside of the body looks after the boring operation:
I also make custom battery sleeves for "C" and 18650 cells (extra charge). Here are some battery/holders for comparison size-wise. From top: "C" cell, FM 4xAA holder, WQ's custom 18650 LiIon holder, FM's 4x14670 holder:
Here is a size comparison of the 3 battery holders (top: WQ's 18650 holder, WQ's AW "C" holder, FM's 4xAA holder)
Last edited: