teme
Newly Enlightened
Hi, my RC-N3 is very dimm after I changed this http://www.dealextreme.com/details.dx/sku.11022 Q5 to it. What is the problem? Any ideas?
Romisen RC-N3 is very dimm
- Thread starter teme
- Start date
Help Support Candle Power Flashlight Forum
Drewfus2101
Enlightened
I've seen that when I have a short in the wiring.
old4570
Flashlight Enthusiast
Yep ...
Pull the pill out ... Check to see if it runs correctly outside the body .
If not , check very carefully for a short ..
Its a process of elimination ..
Do you have a Multimeter ? Check current draw @ the tail
If its a Q5 it should draw around 700Ma to just over 1A measured at the tail .
Anymore [ 1.5A + ] and you need to check for that short .
Pull the pill out ... Check to see if it runs correctly outside the body .
If not , check very carefully for a short ..
Its a process of elimination ..
Do you have a Multimeter ? Check current draw @ the tail
If its a Q5 it should draw around 700Ma to just over 1A measured at the tail .
Anymore [ 1.5A + ] and you need to check for that short .
teme
Newly Enlightened
I tried to measure the current and the multimeter said about 300mA :duh2:
Edit: I tried does it work, and it worked when the poles was connected directly to the battery. Sorry about my bad english.
Edit: I tried does it work, and it worked when the poles was connected directly to the battery. Sorry about my bad english.
Last edited:
csshih
Flashlight Enthusiast
that happened to me on a ultrafire wf606A.. I roasted the driver..
