This was a prototype color that was shown to CPF for orders. After that one was made I took orders for 9 more lights in that color, only one was a stock "D" size Maglite and that other one was a 2D. There were a couple 2AAs made and a 3AA and the rest were custom lights. Another 3D was made for a friend so this is one of two. It has a custom Talon bezel and a custom glass breaker tailcap on the end. It comes with the host including the body, custom bezel, head, custom tailcap and window, plus a cut-down switch (pedestal removed), custom heatsink and a new P7 LED for $120. I bought the heat sink on CPF and I bought an MC-E also. The MC-E was defective so the seller sent me a new P7. The MC-E is still installed in the heatsink and will be included. The MC-E works but two of the four dies are burnt out. The P7 can be installed and used with 3 1.2V rechargeable batteries.
The light has been on my dresser and used in the house for about 2 minutes. It is basically new although there is one small anodizing imperfection, a short line 1/4" long. It can be seen to the left of the switch on the first picture.
I'm looking for $125 shipped US via insured priority or will ship intl for additional shipping.
Light in forefront:
Tailcap used:
The light has been on my dresser and used in the house for about 2 minutes. It is basically new although there is one small anodizing imperfection, a short line 1/4" long. It can be seen to the left of the switch on the first picture.
I'm looking for $125 shipped US via insured priority or will ship intl for additional shipping.
Light in forefront:
Tailcap used:
Last edited: