38 years old.
My lights are all tools for a purpose, though I've technically got all those purposes covered twice, or maybe thrice
There is stuff coming that will change my lineup of complete users, plus some that will be up for sale, so I'll post what it should be by the end of the week.
I have one "thrower" that is also my only remaining incan.
My regular users all use neutral Cree emitters, and all run on AW's protected Li-ion cells with the option of using primaries. A Pila IBC charger handles all of the Li-ions. Since it won't top off R123s that haven't been discharged deeply enough, a no-name(DSD?) dedicated 2x16340 charger that reliably ends the charge at 4.19V is used for that.
The 2x123 SF E series(or compatible) all use McTC tailcaps and McClicky switches which tailstand, and have easily replaceable switches and rubber boots.
Throw:
-bored out SF M3T with Lumens Factory HO-M3T lamp assemblies on AW IMR18500 cells.
Users:
-SF E2L with McTC, Q4-5B emitter, cut-down McR19XR reflector, light diffusing film inside the lens...17670 cells for this one, though it does regulate on low with 2xR123 if slightly drained.
-SF E2DL w/long clip, McTC, Q3-5A emitter, F04 diffuser
-Malkoff M60W hosted by: McTC, SF E2D body w/long clip, VME bezel
-Malkoff M60WLF hosted by: McTC, black HA Aleph 2x123 body, VME bezel
-Zebralight H30 x2
Keyring:
-Arc AAA-P
Wanted a 2AA light, and am trying out a Quark 2AA Tactical with Q3-5A emitter, and Olight diffuser. May buy a second with extra bodies for some added versatility, but that remains to be seen.
No desire for brighter lights at the moment, but can see jumping on the bandwagon for higher output emitters if their increased efficiency is put to use in the form of greater runtime at similar output. Mine are all adequate as they are, though(otherwise those Malkoffs would be running on 2x18500 instead of 2xR123).