Withdrawn: KL4 MC-E
FS:
1. KL4 head modded with a cool white WC bin MC-E. Stock circuit runs the emitter wired as 2p2s at 400 mA per die. Flat regulation on 2 CR123A cells or a single 3.7V cell (for a killer TW4 configuration - IMR cell recommended). Over 300 honest OTF lumens. Throw measured at 1500 lux at 1 meter. Light diffuser film added to the lens (removable) to clean up typical circle-cross MC-E artifacts. Basically, a "wall of light" type of beam with twice the throw and 3 times the output of a stock KL4, and with less heat.
Very good condition, with a few tiny specs of missing ano on sharp edges.
*WITHDRAWN*. Add $25 for an E2E body with tailcap (some wear) to make a complete light.
Photos:
2. Fenix lego: L2P head and tailcap with a single AA body from a L1P and a custom CR123 body (as reviewed here). With the custom tube, this is one of the smallest/lightest single CR123 clickie lights out there. Modded with a neutral white 4000K high-CRI (CRI=93) Seoul emitter. Stock single mode driver.
Condition: Good. Some wear on sharp edges of the head and tailcap. AA body is unused. CR123 body shows some wear on knurling.
*TRADED*
Conditions: first unconditional "i'll take it" takes priority. Paypal or USPS MO. Free shipping in ConUS, all others contact me for a shipping quote.
Thanks for looking.
FS:
1. KL4 head modded with a cool white WC bin MC-E. Stock circuit runs the emitter wired as 2p2s at 400 mA per die. Flat regulation on 2 CR123A cells or a single 3.7V cell (for a killer TW4 configuration - IMR cell recommended). Over 300 honest OTF lumens. Throw measured at 1500 lux at 1 meter. Light diffuser film added to the lens (removable) to clean up typical circle-cross MC-E artifacts. Basically, a "wall of light" type of beam with twice the throw and 3 times the output of a stock KL4, and with less heat.
Very good condition, with a few tiny specs of missing ano on sharp edges.
*WITHDRAWN*. Add $25 for an E2E body with tailcap (some wear) to make a complete light.
Photos:
2. Fenix lego: L2P head and tailcap with a single AA body from a L1P and a custom CR123 body (as reviewed here). With the custom tube, this is one of the smallest/lightest single CR123 clickie lights out there. Modded with a neutral white 4000K high-CRI (CRI=93) Seoul emitter. Stock single mode driver.
Condition: Good. Some wear on sharp edges of the head and tailcap. AA body is unused. CR123 body shows some wear on knurling.
*TRADED*
Conditions: first unconditional "i'll take it" takes priority. Paypal or USPS MO. Free shipping in ConUS, all others contact me for a shipping quote.
Thanks for looking.
Last edited: