Imalent        
Results 1 to 3 of 3

Thread: T100C2 UI & Head dissassembly?

  1. #1
    Flashaholic
    Join Date
    Feb 2006
    Location
    San Diego
    Posts
    263

    Default T100C2 UI & Head dissassembly?

    Has anyone here opened up a T100C2 head? I'm examining the ring and I notice two notches spaced around the board that might be used for unscrewing. Unfortunately mine won't budge..
    Picture:
    Last edited by Anto; 10-12-2009 at 02:16 AM.

  2. #2
    Flashaholic notsobrite's Avatar
    Join Date
    May 2008
    Location
    austin, tx
    Posts
    164

    Default Re: T100C2 UI & Head dissassembly?


  3. #3
    Flashaholic
    Join Date
    Feb 2006
    Location
    San Diego
    Posts
    263

    Default Re: T100C2 UI & Head dissassembly?

    I'm thinking since the notches are on both sides, there has to be a way eagletac gets the mode switching ring on.. maybe a tool shaped like this:

    That goes into the head to unscrew it..

    I've also found that the threading for the head goes all the way down past the heatsink.





    I'm thinking if I dimple the metal head below the brass spring, I should be able to stick some needlenose pliers in there and unscrew it?
    Last edited by Anto; 10-12-2009 at 03:57 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •