• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired FS: Aleph A1 kit, needs two parts.

TranquillityBase

Flashlight Enthusiast
Joined
Jun 12, 2005
Messages
3,741
$175 delivered

What you'll get;

A1 head
OEM bezel ring
CR123/RCR123A body
Switch housing
McClicky switch
Rubber boot cap
Body o-rings, window o-ring
GD 500 LE, with Seoul USVOH

What you'll need;

One window (Not listed on the Shoppe's site, but Wayne may have them?), otherwise Flashlightlens would be my next choice. $20 for Sapphire if you can source a Sapphire lens, $5 for UCL, both estimated cost.
McR27 reflector (In stock at the Shoppe). $17, current price, I just checked.

The body is slightly lighter in HAIII color than the head and the switch housing.

What else can I say...It's a good one! :twothumbs

p1080482.jpg
 
Last edited:

coloradogps

Flashlight Enthusiast
Joined
Sep 22, 2007
Messages
1,283
Location
Colorado
Re: FS: Newbie special Aleph A1 kit, needs parts

Great deal for some new member here!

Great seller also!

:twothumbs
 

Cuso

Flashlight Enthusiast
Joined
May 18, 2006
Messages
1,733
Location
Florida
Re: FS: Newbie special Aleph A1 kit, needs parts

Awesome gesture from one of the best...:thumbsup:
 

tdurand

Enlightened
Joined
Dec 30, 2005
Messages
631
Location
Wisconsin
Re: FS: Newbie special Aleph A1 kit, needs parts

Interesting offer TB! Great light too!
 

TranquillityBase

Flashlight Enthusiast
Joined
Jun 12, 2005
Messages
3,741
Re: FS: Aleph A1 kit, needs parts

OK, I see this idea went over like a lead balloon...:green:

Open to all :welcome:
 

nein166

Flashlight Enthusiast
Joined
Feb 16, 2006
Messages
1,575
Location
New York
Hey Scott maybe a Cree LE and an Aspheric lens would get this light sold ;)
 

maxspeeds

Flashlight Enthusiast
Joined
Jan 24, 2007
Messages
2,177
Location
Oahu, Hawaii
Is there an aspheric for 27mm lens? If so, I want one :D

*sorry to go off topic, Scott. Bump for an awesome setup. I have an identical one in black :popcorn:
 

nein166

Flashlight Enthusiast
Joined
Feb 16, 2006
Messages
1,575
Location
New York
Re: FS: Aleph A1 kit, ASPHERIC OPTION

As per PM with Tranquility Base I am offering a second option for this sale.

Buy the host from TranquilityBase and I will ship the following parts to complete the light no additional lens or reflector needed.

This option will replace the GD 500 LE, with Seoul USVOH

Aspheric Option

1.) 28mm DX Aspheric
2.) Cree XR-E GD750 LE with Ultra Green Glow Epoxy in an XR-Can


To mount the Aspheric lens place the window o-ring in the head to the bottom of the bezel ring threads.
Place the lens on the o-ring.
Screw in the bezel ring and nudge the lens to center.
Install the Light Engine and adjust LE for focus

Focus Disclaimer:
In all fairness the LE can be focused to show the die image but the threads of the body will only just catch. Not weatherproof, not closed. With the body o-ring against the head the focus is still square and tight but defocused so the die bars can't be seen. Its a pocket thrower but not a laser like an aspheric maglight.
 

DaFABRICATA

Flashlight Enthusiast
Joined
Jan 10, 2007
Messages
3,946
Location
Michigan
Re: FS: Aleph A1 kit, ASPHERIC OPTION

I know its a long shot, but I just have to put it out there.....IF you end up parting it out, I'd take the Aleph 1 head...:p


Good luck with your sale my friend!!:twothumbs
 
Top