Flashlight case for storage
- Thread starter hatman
- Start date
Help Support Candle Power Flashlight Forum
My flashaholicism has progressed to the point where I need to store and organize nearly a dozen pocket-size torches. Both single and double-cells.
I'm looking for something that won't cost hundreds of dollars, as do some of the more expensive Pelicans. (I'm certainly open to a less pricey Pelican.)
If you have a recommendation, kindly list the model number.
Believe it or not, the dealer I asked for advice suggested I come here instead.
Thanks for your help.
I'm looking for something that won't cost hundreds of dollars, as do some of the more expensive Pelicans. (I'm certainly open to a less pricey Pelican.)
If you have a recommendation, kindly list the model number.
Believe it or not, the dealer I asked for advice suggested I come here instead.
Thanks for your help.
Great link -- thanks.
What do you make of this case --
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=39196
What do you make of this case --
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=39196
That case is pretty much th esame exact one that I use.
I have the lights in th ebottom section and use the pockets for my knives and batteries.
I picked mine up at Lowes for 29.99.
http://images.lowes.com/product/converted/820909/820909601326md.jpg
I have the lights in th ebottom section and use the pockets for my knives and batteries.
I picked mine up at Lowes for 29.99.
http://images.lowes.com/product/converted/820909/820909601326md.jpg
Last edited by a moderator:
amigafan2003
Enlightened
- Joined
- Sep 2, 2009
- Messages
- 248
You don't have to spend a fortune to get a worthwhile case:-
Case is an old Britool tool carrier off ebay for £6. just needed painting and a couple of new rivets for the hinges.
£5 for some pick and pluck foam from ebay (enough to do the case twice over).
Just waiting for my Quark 1232 Turbo to fill that lonely gap now
Case is an old Britool tool carrier off ebay for £6. just needed painting and a couple of new rivets for the hinges.
£5 for some pick and pluck foam from ebay (enough to do the case twice over).
Just waiting for my Quark 1232 Turbo to fill that lonely gap now
The cases look almost identical. I also think that if I had done the "plucking" a little different I might have been able to get 1 or 2 more in there. You may notice the big ol' M2 in the corner. That also takes up some room!
It came with both the foam and the separator things..they went into the tool shed probably never to emerge again!
I'm not sure what type of lights they're putting in there .:shrug:
The measurements on your link are 18 x 12 3/4 x 6....
My Task Force box according to the lowes.com website is 18 x 13 x 6.
The measurements on your link are 18 x 12 3/4 x 6....
My Task Force box according to the lowes.com website is 18 x 13 x 6.
Hi :huh:
Is this somthing you could use? I like it :naughty:
http://cgi.ebay.com/Aluminum-access...emQQptZLH_DefaultDomain_0?hash=item439b4c178c
Edit: the guy got some other cool cases in his ebay store to......
Is this somthing you could use? I like it :naughty:
http://cgi.ebay.com/Aluminum-access...emQQptZLH_DefaultDomain_0?hash=item439b4c178c
Edit: the guy got some other cool cases in his ebay store to......
Last edited:
Sgt. LED
Flashaholic
Nice Ebay case!
Crate on the top and pick N pluck on the bottom, well protected. Not too big but for under 20 shipped should hold quite a few smaller lights.
Now as long as it's put together well! Who knows.
Crate on the top and pick N pluck on the bottom, well protected. Not too big but for under 20 shipped should hold quite a few smaller lights.
Now as long as it's put together well! Who knows.
I may have to order one of those just to check it out.
jp2515
Flashlight Enthusiast
That eBay case looks great for the price. Appears the seller has a few different size cases :twothumbs. Then again Uh oh! 
Big_Ed
Flashlight Enthusiast
I have one of those. Great bag to store my Surefires. I might get another one.
