Hi guys,
This thread is a standing wave offering for the titanium Sapphire 25 AAA flashlights. By standing wave, I mean that I hope to be able to stay ahead of demand and keep these available until further notice. Time will tell. I am holding to the same price as the original Sapphire even though the new converter used here was more expensive and I have added labor involved in the assembly. To be clear in this offering of Sapphire 25's, the only difference between these and the original Sapphire's is that of the converter used. From external view, the lights are the same. In terms of performance, the Sapphire 25 is not as bright as an original Sapphire on a fresh battery. The Sapphire 25 (25 mA drive current to LED) should give you almost 5 hours of runtime on an alkaline AAA battery with an output near 5 lumens. You will still have useable light after 12 hours but with obvious indication that it's time to change the battery!!
The LED used in these is the same as the original Sapphire, a Nichia 3 mm 310DS.
My hope and intent is to process the e-mail orders for these on a first received/ first processed basis and ideally the response to your e-mail order will be a notification of shipment. I don't want to add to the number of communications by sending an acknowledgment prior to generating the postage notification.
These lights are available on first come first serve basis; as determined by e-mail orders I receive which are clear, concise and include the must have information:
In the subject line of the E-mail please state: Sapphire 25
Your CPF name (if you have one)
Your real name and mailing address
phone number if international shipment
Any exceptions to standard shipping, which is priority mail.
If the shipment is domestic and you want insurance, please so state. (No insurance offered on international shipments)
For my general info on how I process these offerings, please refer to THIS THREAD. For more information on the Sapphire 25, please review THIS THREAD.
All of these lights sport some tool marks and various cosmetic singularities. Some may be obvious and some you may need to look closely for.
If you receive one of these lights and decide that it does not meet your expectation then you can either lower your expectations or simply send the light back for a full refund. I won't offer an exchange for probably obvious reasons. (please don't abuse this offer)
Like all of my Ti lights, the Sapphire is designed to be sealed from the environment and external pressure but I make no claim or suggestion that it is a dive or underwater light. Take it under water and you are on your own. (I do
)
Sapphire 25 - $150 plus shipping*
* shipping is via Priority Mail with Delivery Confirmation or Global Priority mail. If you wish shipping via an alternative method, or signature confirmation or insurance on domestic shipments only, please specify in your e-mail order.
EDIT:
Adding (9-2-11) the Sapphire GS to the standing wave offering~
Hi guys,
Now in addition to the Sapphire 25 I am offering what we can call the Sapphire GS. The only difference is in the LED itself. The Sapphire 25 uses the Nichia 3 mm 310 DS as explained in the original thread. The GS uses the new generation of Nichia 5 mm GS LED. This LED is more efficient than the 310 DS and can be driven much harder although it will be coasting in the Sapphire as the same 25 mA converter is being used. The main differences one will see is in the tint of the beam. I am using a warm LED and by virtue of the greater efficiency in the dice, the output in lumens is comparable to the cooler 310DS. Both lights will give you about 5 lumens of light and the GS might give you a bit better run time to boot.
As you can see in the photos below, the Sapphire 25 and Sapphire GS look to be the same except inside the window. (A very cool looking moth was present for the otherwise quite boring photo shoot)
The Sapphire GS is on the right and if you look closely you can see that there is a 5 mm LED in there and not the 3 mm even though the dice look similar in size.
The Sapphire GS is the same price, $150 plus postage and if you would like one of these, please designate that you want the GS . I have a limited number of these on hand at present as I have built them from a small shipment of the LED's. I have a large order of more of the GS LED's on order but it will be weeks before I get them. I guess this is a pretty hot selling LED for Nichia at present.
EDIT 12-24-16 Option for 5 mm High CRI LED is added (see post # 239) Price is the same, $150 plus postage.
This thread is a standing wave offering for the titanium Sapphire 25 AAA flashlights. By standing wave, I mean that I hope to be able to stay ahead of demand and keep these available until further notice. Time will tell. I am holding to the same price as the original Sapphire even though the new converter used here was more expensive and I have added labor involved in the assembly. To be clear in this offering of Sapphire 25's, the only difference between these and the original Sapphire's is that of the converter used. From external view, the lights are the same. In terms of performance, the Sapphire 25 is not as bright as an original Sapphire on a fresh battery. The Sapphire 25 (25 mA drive current to LED) should give you almost 5 hours of runtime on an alkaline AAA battery with an output near 5 lumens. You will still have useable light after 12 hours but with obvious indication that it's time to change the battery!!
The LED used in these is the same as the original Sapphire, a Nichia 3 mm 310DS.
![DSC_1310.jpg](/proxy.php?image=http%3A%2F%2Fdmcleish.com%2FCPF%2FSapphire%2FDSC_1310.jpg&hash=8bd0324f1f514399efe576c5623bd0bc)
My hope and intent is to process the e-mail orders for these on a first received/ first processed basis and ideally the response to your e-mail order will be a notification of shipment. I don't want to add to the number of communications by sending an acknowledgment prior to generating the postage notification.
![DSC_1847.jpg](/proxy.php?image=http%3A%2F%2Fdmcleish.com%2FCPF%2FSapphire%2FSkink-Sapphire%2FDSC_1847.jpg&hash=39c16bea29587670a10ae961824ac34c)
These lights are available on first come first serve basis; as determined by e-mail orders I receive which are clear, concise and include the must have information:
In the subject line of the E-mail please state: Sapphire 25
Your CPF name (if you have one)
Your real name and mailing address
phone number if international shipment
Any exceptions to standard shipping, which is priority mail.
If the shipment is domestic and you want insurance, please so state. (No insurance offered on international shipments)
For my general info on how I process these offerings, please refer to THIS THREAD. For more information on the Sapphire 25, please review THIS THREAD.
All of these lights sport some tool marks and various cosmetic singularities. Some may be obvious and some you may need to look closely for.
If you receive one of these lights and decide that it does not meet your expectation then you can either lower your expectations or simply send the light back for a full refund. I won't offer an exchange for probably obvious reasons. (please don't abuse this offer)
Like all of my Ti lights, the Sapphire is designed to be sealed from the environment and external pressure but I make no claim or suggestion that it is a dive or underwater light. Take it under water and you are on your own. (I do
Sapphire 25 - $150 plus shipping*
* shipping is via Priority Mail with Delivery Confirmation or Global Priority mail. If you wish shipping via an alternative method, or signature confirmation or insurance on domestic shipments only, please specify in your e-mail order.
EDIT:
Adding (9-2-11) the Sapphire GS to the standing wave offering~
Hi guys,
Now in addition to the Sapphire 25 I am offering what we can call the Sapphire GS. The only difference is in the LED itself. The Sapphire 25 uses the Nichia 3 mm 310 DS as explained in the original thread. The GS uses the new generation of Nichia 5 mm GS LED. This LED is more efficient than the 310 DS and can be driven much harder although it will be coasting in the Sapphire as the same 25 mA converter is being used. The main differences one will see is in the tint of the beam. I am using a warm LED and by virtue of the greater efficiency in the dice, the output in lumens is comparable to the cooler 310DS. Both lights will give you about 5 lumens of light and the GS might give you a bit better run time to boot.
As you can see in the photos below, the Sapphire 25 and Sapphire GS look to be the same except inside the window. (A very cool looking moth was present for the otherwise quite boring photo shoot)
![DSC_6755.jpg](/proxy.php?image=http%3A%2F%2Fdmcleish.com%2FCPF%2F2011-photos%2FDSC_6755.jpg&hash=465b43ec46a415ced871ebb8b73f90e9)
The Sapphire GS is on the right and if you look closely you can see that there is a 5 mm LED in there and not the 3 mm even though the dice look similar in size.
![DSC_6754-AAA.jpg](/proxy.php?image=http%3A%2F%2Fdmcleish.com%2FCPF%2F2011-photos%2FDSC_6754-AAA.jpg&hash=28139ac496827f8da49e1efe4911245e)
The Sapphire GS is the same price, $150 plus postage and if you would like one of these, please designate that you want the GS . I have a limited number of these on hand at present as I have built them from a small shipment of the LED's. I have a large order of more of the GS LED's on order but it will be weeks before I get them. I guess this is a pretty hot selling LED for Nichia at present.
EDIT 12-24-16 Option for 5 mm High CRI LED is added (see post # 239) Price is the same, $150 plus postage.
Last edited: