• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired D36 1x26650 & 3x26500 Host by FiveMega

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,522
Location
California
(AVAILABLE)

Please allow 7 days to ship

Please note: I will not send email or PM to individuals regarding payment confirmation and shipping status.
All these information will be next to your CPF handle in this post.
All 50 States shipping will come with tracking number but for international orders I will provide label number. Sorry, no tracking available for international orders.


P1010364.jpg

P1010373.jpg

P1010363.jpg




Please read completely before you post or buy then pay and post.



Absolutely NO reservation.


Hi folks, Here I came with nonstopping new toys for you.
These bodies are similar to these but comes with bezel and Borofloat lens. D36 module and batteries are (NOT INCLUDED).
Bodies have slightly larger ID to accomodate 27mm cell.
All bodies, tail caps and bezels are black hard anodized and no other color available.
First picture shows 3x26500 version on top and 1x26650 body on bottom.
Tail cap has more attractive milling similar to M6 and can accept either version B of these or McClicky. An adapter included to use with McClicky switch.
Tail cap accepts key ring too.
Switch boot is easy to operate with one hand and choice of black, orange or green GID
Head and body are machined from one piece of high grade aluminum bar and has lots of fine and deep grooves to manage better heat dissipation which is more critical with extreme hot LEDs such as SST-50, SST-90 or extreme hot FM1909
Will take many different D36 lamp assemblies such as this, this, FM-D36 socket/reflector module or any other drop in D36 lamp/LED modules.
I strongly suggest these for single 26650 or FM-D36 socket/reflector+1909 module (2200 Lumens).
3x26500 version is excellent choice for 2200 Lumens 1909 socket/reflector module.
D26 bodies are available here and here.
Possibilities are endless.
I use STT-90 drop in with 1x26650 and never seen such a light from this small package. Thanks Dave. 👍

Advantages:
Not only you will get long run time compare to 17mm or 18mm cells but brighter output because of less voltage sag, less stress to cells and less frequent recharge.
Body thickness is about 32mm which is about 6mm fatter than original 9P but tail cap has 35mm diameter, so chance of slipping out of hand is very little.
Each body comes with one head o'ring, two tail side O'rings, one tail cap, one switch adapter, one dust cover boot, one crenelated bezel, Borofloat lens and lens O'ring. No lamp assembly, and No batteries included. McClicky switch is optional for additional of $10 installed or insert and tighten your McClickie inside the provided ring then install this switch assemly inside tail cap. Please see picture.
What you get is a complete host including body, tail cap, tail cap boot, tail cap ring, bezel, lens and all needed o'rings. McClickie switch is not included but optional. Head and body is made of one piece (nonremoveable) high grade aluminum for better heat sinking.
*These bodies are designed to take several different types of D36 modules but you may need to extract short spring of some modules.*
Price:
Black 1x26650 $89 (NOT AVAILABLE)
Black 1x26650 with one battery $103 (NOT AVAILABLE)
Black 3x26500 $99 (AVAILABLE)
D36 socket/reflector with installed FM1909 $60 (MAY OR MAY NOT WORK WITH OTHER HOSTS)
Each FM1909 $10 (AVAILABLE with purchase of 3x26500 host)
McClickie switch $10 installed (AVAILABLE) with purchase of body.
Extra boot (switch cover) $1 (AVAILABLE) with purchase of body. (Black, orange or GID)
Shipping to States $6 (any quantity)
Internationaly $10 (any quantity)
Please add 4% to total for CC paypal fee.

NO extra battery available or will be available.

No reservation please. You must pay FIRST then claim your spot by posting here. I will sign your name right after receiving payment unless you paying by MO.
Please don't pay if you may change your mind. There will not be any refund.
It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
I will never figure out what for is your payment and from whom without above information therefore I will reject payment.
Example:
Mr Gangfire :paypal: for #79 1x26650 with black boot
Paypal: [email protected]
Please PM for postal money order payment.
E bodies are available here.
MN sockets are unavailable here.
A2 sockets are unavailable here.
D26 socket/reflectors are available here.
2x26500 and 3x26500 Exotic M*gs are available here.
Any comment welcome.
www.USPS.com
----------------------

#01 1x26650 $89 QtrHorse paid shipped 0308073000016682XXXX
#02 1x26650 $89 daimleramg paid shipped LC845286662US
#03 1x26650 $89 Joe_torch MO received shipped LC845286804US
#04 1x26650 $89 nailbender paid shipped 2308218000002886XXXX
#05 1x26650 $89 nailbender paid shipped 2308218000002886XXXX
#06 1x26650 $89 donn_ paid shipped 0308073000016682XXXX
#07 1x26650 $89 Crater_Crater Echeck cleared shipped 0308073000016683XXXX
#08 1x26650 $89 donn_ paid shipped 0309033000002383XXXX
#09 1x26650 $89 Norm paid shipped LC845286676US
#10 1x26650 $89 JohnF paid shipped 0308073000016683XXXX
#11 1x26650 $89 OneBigDay paid shipped 0308073000016683XXXX
#12 1x26650 $89 flashfiend paid shipped 0309033000010309XXXX
#14 1x26650 $89 Jackspc paid shipped 0309033000010309XXXX
#15 1x26650 $89 ptolemy paid shipped 0307333000015983XXXX
#16 1x26650 $89 BigHonu paid shipped 0309288000011043XXXX
#17 1x26650 $89 OneBigDay paid shipped 0308073000016683XXXX
#18 1x26650 $89 stallion2 paid shipped 0309288000011110XXXX
#19 1x26650 $89 andyfrasier paid shipped LC547565091US
#20 1x26650 $89 led-it-be paid shipped LC547565295US
#21 1x26650 $89 andyfrasier paid shipped LC547656321US
#22 1x26650 $89 swrdply400mrelay paid shipped 0308073000016684XXXX
#23 1x26650 $89 Bob96 paid shipped 0308073000016685XXXX
#24 1x26650 $89 Bob96 paid shipped 2307177000000827XXXX
#25 1x26650 $89 jv01 paid shipped 0308073000016685XXXX
#26 1x26650 $89 Bob96 paid shipped 0308073000016683XXXX
#27 1x26650 $89 edelbrock paid shipped 0309288000011707XXXX
#28 1x26650 $89 tstartrekdude paid shipped 0309288000011707XXXX
#29 1x26650 $89 MCFLYFYTER paid shipped 0309288000011707XXXX
#30 1x26650 $89 jv01 paid shipped 0309288000011707XXXX
#31 1x26650 $89 Bob96 paid shipped 2308044000002616XXXX

---------------------
#01 3x26500 $99 nailbender paid shipped 2308218000002886XXXX
#02 3x26500 $99 mknewman paid shipped 0308073000016683XXXX
#03 3x26500 $99 ShineOnYouCrazyDiamond paid shipped 0309288000011043XXXX
#04 3x26500 $99 Bullet Bob shipped 0309288000011044XXXX
#05 3x26500 $99 pete7226 paid shipped 0309288000011044XXXX
#06 3x26500 $99 Bob96 paid shipped 2307177000000827XXXX
#07 3x26500 $99 Bob96 paid shipped 0308073000016683XXXX
#08 3x26500 $99 jv01 paidshipped 0309288000011715XXXX
#09 3x26500 $99 Bob96 paid shipped 23082180000028872131
#10 3x26500 $99 m@tty paid shipped LC547811124US
#11 3x26500 $99 finefire paid shipped 23082940000035401298
#12 3x26500 $99 JasonH paid shipped 9114901159815942858646
#14 3x26500 $99 ErikP paid shipped 9505511144965134525188
#15 3x26500 $99 Mesa232323 paid shipped 9505513808432325491607

#16 3x26500 $99 (AVAILABLE)
#17 3x26500 $99 (AVAILABLE)

-------------------------
Please find link of my other products here and click on each link you are interested on.
-------------------------

(A V A I L A B L E)
 
Last edited:

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,522
Location
California
The actual head is part of the body and only the bezel comes off?
That's correct.

The D36 drop-in fits flush against the glass and does not sit deep in the head like a Surefire shock absorbing head?
These are very similar to $urefire C head but larger to hold D36

These will work with a 18650 cell if a sleeve is used to center the battery?
Yes, 1x26650 will work with 18650 if you use proper size sleeve.
BTW
these are 3x18500 version of D36


If the bezel comes off, will a Surefire M bezel fit?
No, These have nothing to do with M head.

Can some one give me some dimensions for the 1X26650?
OAL, head dia, body dia?
Overal length 6" (152mm)
Bezel diameter 13/4" (45mm)
Body diameter 11/4" (32mm)


single cell body seem to be asked for
BADLY
;)
any chance now?
Unfortunately, not a good idea for slow moving items.
 
Last edited:

QtrHorse

Flashlight Enthusiast
Joined
May 2, 2008
Messages
1,159
Location
Texas
A few dumb questions.

The actual head is part of the body and only the bezel comes off?

The D36 drop-in fits flush against the glass and does not sit deep in the head like a Surefire shock absorbing head?

These will work with a 18650 cell if a sleeve is used to center the battery?
 

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,522
Location
California
The actual head is part of the body and only the bezel comes off?
That's correct.
The D36 drop-in fits flush against the glass and does not sit deep in the head like a Surefire shock absorbing head?
These are very similar to $urefire C head but larger to hold D36
These will work with a 18650 cell if a sleeve is used to center the battery?
Yes, 1x26650 will work with 18650 if you use proper size sleeve.
BTW these are 3x18500 version of D36


If the bezel comes off, will a Surefire M bezel fit?
No, These have nothing to do with M head.
 
Last edited:

QtrHorse

Flashlight Enthusiast
Joined
May 2, 2008
Messages
1,159
Location
Texas
I will take #13, just kidding.

I will however take #01 1x26650 $89 (AVAILABLE) with a orange boot.

:paypal:

Without a gold version, how are you going to get Lux to buy one?
 
Last edited:

QtrHorse

Flashlight Enthusiast
Joined
May 2, 2008
Messages
1,159
Location
Texas
LOL...I figured Lux had an agreement with you so that you made one of everything you bring to market in gold now.

By the way, this is a great product that you had made. I reserted to buying some Lumens Factory Mini D36 Turbo heads and having them coated in black so I could use a D36 drop-in with my other 1x26500 bodies that are like these.

Now all we need to do is get AW to start producing 26650 cells. I guess battery space is going to run out of 26650 cells again with these bodies being available.
 
Last edited:

nailbender

Flashlight Enthusiast
Joined
Nov 9, 2008
Messages
3,682
Location
North Carolina
Hi

#4 1X26650
#5 1X26650

#3 2X26650

Switches installed GITD covers please if you have them

:paypal: In my paypal notes I put #1 on the 2X26650 as he wasn't listed yet sorry.


By the way folks I have been using a 3X26500 of FM's with NIMH and a SST50 and it is great, with this head and that config it will give great run times with no heat problems.
I ran a SST 90 in a 1X26650 with battery space 26650 for 45 minutes on a walk yesterday and no heat problems at all.


Thanks FM

Dave
 

donn_

Flashaholic
Joined
Oct 10, 2007
Messages
8,067
Location
Great South Bay, LINY
#6 D36 1x26650 host, with McClicky and black boot.

:paypal:

:thanks:

Forgot to put my CPF handle in the notes.

(Unique Transaction ID #8KS33987RD738450B)
 
Last edited:

Crater_Crater

Newly Enlightened
Joined
Jul 25, 2009
Messages
41
Location
TX
#17 1x26650 $63 (AVAILABLE) (from the D26 Thread)
#07 1x26650 $89 (AVAILABLE) (d36)

+Shipping and McClicky's, 6+20= 178
 

donn_

Flashaholic
Joined
Oct 10, 2007
Messages
8,067
Location
Great South Bay, LINY
:takeit: #08 1x26650 $89 (AVAILABLE)

:paypal:

:thanks:

Another home run, FM. I got my first one today, popped in a nailbender SST-50, with a Malkoff connection ring and a cell, and it's beautiful! Perfect fit and finish.

:goodjob:

:santa:


 

Norm

Retired Administrator
Joined
Jun 13, 2006
Messages
9,512
Location
Australia
Paypal sent with the difference between the two.

Is it possible to change my order for Re: $urefire C head 1x26500 & 2x26500
  • #18 1x26650 body with black boot $63
  • Installed McClickie switch $10
  • 2 X Extra Boot $2
  • Shipping $8
  • X 4% PP fees $3.36
  • Total $86.36
#09 1x26650 $89 replacing #18 1x26650 body with black boot $63
I will send the extra $ when I know it's OK.
 
Last edited:

nailbender

Flashlight Enthusiast
Joined
Nov 9, 2008
Messages
3,682
Location
North Carolina
Hi Vorooj

Got mine yesterday and love them, they are compact and just great with the SST series but also think of the run time on one of these batts with an XPG. One battery and you could get hours.

I have but one problem do I use this or my 3X 26500 with my FM turbo head. Terrible problem to have:devil: I am a lucky guy.

Thanks Again for all these cool products and have a great holiday

Dave
 
Top