Jetbeam M1X on the way, which batteries should I order?

bigbas101

Newly Enlightened
Joined
Oct 6, 2009
Messages
22
Hey guys!

We'll I finally ordered the Jetbeam M1X and I am really exited to use it! I tried searching and did not find a clear answer, and maybe that's because there is no clear answer, but I'll try. I am wondering which batteries I should order. I have looked at the runtime graphs and it seems that the protected 18650's get the best runtime while still producing the the same output as the other battery options. Can anyone recommend a good set of RECHARGEABLE batteries (I'll probably get 2 sets) and a charger for my M1X, there are so many options and I want to make sure I go with a good brand. The only other light I have is a Olight M20 and I run primary 123's on it but I think this would get pricey if I did it for both lights. I hope my post is clear and easy to understand. Thanks for helping out a Newbie , it is much appreciated! :thumbsup:

Thanks you

Best regards,

Chris
 
Last edited:

TriChrome

Enlightened
Joined
Jul 12, 2007
Messages
222
Location
Pennington, NJ
You can only use 2x 18650's if you got the extension tube. 2x 18500's which Outdoors Fanatic mentioned will fit without having the extension tube.

I personally like 18650's for my light, but that will also vary depending on which future purchases you plan on making and which cells they could use.

There's an UltraFire charger on Lighthound which he recommends as well, think it's around $17. It will charge the 18650's for sure, and I think it will charge the shorter 18500's as well since I have to pull back the charging prongs quite a bit to fit my 18650's in there.
 

bigbas101

Newly Enlightened
Joined
Oct 6, 2009
Messages
22
Oh wow ok, see this is why I love this forum! So will the above mentioned 18500's have the same runtime/output as the 18650's? I would love to leave the light shorter (without extension tube) but wouldn't mind extending if it meant better performance. And forgive my ignorance but I would get the protected cells, correct? hope I'm not :dedhorse:

Thanks!

Best regards
 

Outdoors Fanatic

Flashlight Enthusiast
Joined
Sep 24, 2005
Messages
4,865
Location
Land of Spiders
Oh wow ok, see this is why I love this forum! So will the above mentioned 18500's have the same runtime/output as the 18650's? I would love to leave the light shorter (without extension tube) but wouldn't mind extending if it meant better performance. And forgive my ignorance but I would get the protected cells, correct? hope I'm not :dedhorse:

Thanks!

Best regards
Peformance is the same, it doesn't matter if you use 2x18500, 2x18650 or 3x16340. Only runtime differs, with 2x18560 you gain 15 minutes, hardly an argument in favor of the longer form factor in my opinion. With 2x18500 you still get over an hour on full power.
 

bigbas101

Newly Enlightened
Joined
Oct 6, 2009
Messages
22
Looks Like I'm gonna order the Protected AW 18500 cells, seems like the ideal batteries to keep the size down while still getting a good runtime. Thanks for all the help!!!!:twothumbs
 

TriChrome

Enlightened
Joined
Jul 12, 2007
Messages
222
Location
Pennington, NJ
18500's are 1500mah. 18650's are 2600mah.

I'm not expert on runtimes, but I would expect a lot more than 15 extra minutes of runtime on the 18650's (the 18650's are rated for 3 hours on high power).
 

bigbas101

Newly Enlightened
Joined
Oct 6, 2009
Messages
22
18500's are 1500mah. 18650's are 2600mah.

I'm not expert on runtimes, but I would expect a lot more than 15 extra minutes of runtime on the 18650's (the 18650's are rated for 3 hours on high power).

On selfbuilts review he did runtime tests, 2x18650 ran for 1hr 34mins to 50% power, 2x18500 ran for 1hr 8mins to 50% power, there is a 26min difference. I'm wondering if I should run it with the extension tube for this extra 26 mins, I don't think it's worth it.

here is a link to the review
https://www.candlepowerforums.com/threads/230019

I'm on the lighthound checkout page with with the AW 18500's and the Ultrafire wf-139 charger....should I sumbit?
 
Last edited:

skyfire

Flashlight Enthusiast
Joined
Dec 4, 2009
Messages
1,823
Location
Los Angeles
the m1x is not exactly a pocket light, to me, that extra 1 inch or so wouldnt matter.

i would get the extension and 2x18650 protected cells. just because alot of makers seem to be supporting the 18650 cells, and many lights such as the olight m20 support it as well.

that way you can have more options in your future purchases of lights.
 

skyfire

Flashlight Enthusiast
Joined
Dec 4, 2009
Messages
1,823
Location
Los Angeles
the ultrafire is a good charger, i think you would have to buy spacers if you want to charge cr123a though

if your willing, the pila IBC is very nice for $50 from
illuminationgear(s).com sorry dont know exact spelling.
you can also get 8% discount for being a CPF member.

ive purchased from them before and service is great. theres also free shipping but you have to buy a certain amount.
 

bigbas101

Newly Enlightened
Joined
Oct 6, 2009
Messages
22
I went ahead and ordered the 18500's. I would rather spend the money on 2 extra batteries than on the extender and higher price of the 18650's, that way I can always have 2 charged and ready to go! That's just my opinion, I know others will think differently but I like the smaller form factor for walks and such.
 

grunscga

Newly Enlightened
Joined
Jul 30, 2009
Messages
144
Location
Indiana, USA
Ok, maybe not 15 minutes. You'll get a "whopping" 26 extra minutes.

...which is almost a 40% increase in runtime. Or 140% of the original runtime, if you really want to slant the "feel" of the statement in favor of 18650s.

I'd probably go with the 18500s, too, but don't ignore the quite real advantage of the larger batteries.
 

TriChrome

Enlightened
Joined
Jul 12, 2007
Messages
222
Location
Pennington, NJ
Can anybody answer why the reviews runtimes are about half of what the manufacturer states? ...just curious about that (and I'm still learning all this flashlight stuff)
 

bigbas101

Newly Enlightened
Joined
Oct 6, 2009
Messages
22
Can anybody answer why the reviews runtimes are about half of what the manufacturer states? ...just curious about that (and I'm still learning all this flashlight stuff)

The runtimes in the review I quoted above is to 50% power, so there is still alot of juice left but the beam will not be at 100% brightness. I believe factory runtimes are from 100% all the way down to 0% when the batteries no longer power the flashlight at all. I may be wrong, and please let me know if I am :)
 

DimeRazorback

Flashlight Enthusiast
Joined
May 3, 2009
Messages
2,994
Location
Australia
I switch between 18650's or 18500's all the time.

I like both configurations as the combat grip compensates for the extra length when using 18650's :thumbsup:
 

LED-Wingnut

Newly Enlightened
Joined
Dec 21, 2009
Messages
4
This is a great thread as I just ordered a M1X too. Was looking for different battery opinions. Thanks!
 

tonkem

Enlightened
Joined
Dec 3, 2009
Messages
964
Location
Frisco, TX
I would use 18500 if I had a M1X :p
Any issue report of the M1X running on flat-top cells?

Cheers,
Dioni

I got a M1X and ordered Aw 18500 and aw18650 cells, with the extender, and just tried the 18650 cells tonight and they will not power on the light, as they are the new "flat top" cells. I will be sending them back and getting a set of the 2200 mAh cells without the flat top.

Hope this helps.

Tony:wave:
 
Top