Surefire L4 with RCR123's

jonanddad · Jan 20, 2010

I searched the forums and could not come up with much other than don't do it. But i did not see anyone do it so i made a short little video so here it is.

http://www.youtube.com/watch?v=M42uo4QI-I4

Justin Case · Jan 20, 2010

Based on the video frames at about 1:40, it looks like your L4 is the new one that uses a Seoul P4, and thus a buck driver. The original L4 used a Luxeon V LED and a boost driver.

The old L4's boost driver is based on the Linear LTC1872 boost IC, which has an absolute max voltage input spec of 10V. But being a boost driver, when Vin exceeds Vf the driver probably goes into direct drive.

jonanddad · Jan 20, 2010

I figured I'd make a video about this as i had not seen anyone do one before and i hope this helps people if they where wondering if they could use 2 RCR123's in a SF L4 but like i said in the video i take no responcobility if someones LED dies when they try it.

Surefire L4 with RCR123's

jonanddad

Newly Enlightened

Justin Case

Flashlight Enthusiast

jonanddad

Newly Enlightened

Similar threads

Latest posts