Sold/Expired Surefire 6P, 9P, etc Tailstanding Shrouds with Bezel Down Pocket Clip

Hello again everyone :wave:

Here I have another new item for you.

These are my Delrin Tail Shrouds, with a pocket clip attached.
(These shrouds are made for Surefire's Z41 twisty tailcap with a McClicky upgrade kit installed)

The pocket clips are spring tempered Stainless Steel with a Black Oxide finish.
The screws are Stainless Steel with a Black Oxide finish.

I am very happy with these.
I only have a handful of them for now.
If demand is high, I may make some more.

Sold out

Thank You

PLEASE NOTE:
THESE DO NOT FIT MALKOFF LIGHTS TIGHTLY.

Similar parts that are actually purpose built for Malkoff lights will be in stock on Gene's website soon.
http://www.malkoffdevices.com/shop/pocket-clip-and-tail-shroud-to-fit-md2-p-84.html

Also, If you have a Surefire Z59 tailcap, the Malkoff shrouds will fit nicely, with the correct height, and a tight fit.

If you have an RA clicky, the Malkoff shrouds may work on them. The fit on mine is pretty tight, but not as tight as the other lights. However, the knurling seems to grab into the delrin well. This info is based on my testing with 1 RA clicky light. I cannot guarantee the fit on your RA light.

Re: Surefire 6P, 9P, etc Tailstanding Shrouds with Bezel Down Clip

Ill take one. Ill send paypal tonight when I return home from work.
Thanks, PAUL

Interest withdrawn.

Sorry.

Very nice and a good price! I wish I had a host that could make use of one of these.

Clever upgrade!

WHOA. If these will fit my Ra Clicky, I will take one! Will they?

And if so, can I get the clip plain SS?

I just measured the tailcap diameter and its a little less than 1". I dont' think they will fit.... aarg...

Will these fit a stock Z41? Or is the Mclicky somehow integral in the function/design?

Thanx for your time

Thanks

KDOG3 said:

WHOA. If these will fit my Ra Clicky, I will take one! Will they?

And if so, can I get the clip plain SS?

I just measured the tailcap diameter and its a little less than 1". I dont' think they will fit.... aarg...

Click to expand...

These will not fit the RA lights tightly.

Liteskr42 said:

Will these fit a stock Z41? Or is the Mclicky somehow integral in the function/design?

Thanx for your time

Click to expand...

These will fit the stock Z41 fine. The only difference is that the button is not as tall when stock. So, the shroud is a little taller than it needs to be for the stock button.

EvilPaul2112 said:

Thanks

Click to expand...

Thank You Sir.
It will ship out today

You know what I'm taking one anyway! Paypal inbound!

Will they fit over the standard Solarforce L2 tailcap and enable tailstanding for the L2?

easilyled said:

Will they fit over the standard Solarforce L2 tailcap and enable tailstanding for the L2?

Click to expand...

I do not have any solarforce parts to check the fit.

EvilPaul2112 & KDOG3: Orders shipped

Moddoo said:

I do not have any solarforce parts to check the fit.

Click to expand...

If/when you do, please give me a shout and let me know.
Great idea, BTW, like all your innovatory designs. :thumbsup:

Sweet, I have been waiting for these.

I will take one.

PayPal sent.

Couple questions though...

1. Is the delrin black or is it painted?
2. These appear to just slip over the tailcap. Is that correct?
3. Got any pictures of one not installed?

737mech said:

Sweet, I have been waiting for these.

I will take one.

PayPal sent.

Couple questions though...

1. Is the delrin black or is it painted?

Click to expand...

The Delrin is black all the way through

2. These appear to just slip over the tailcap. Is that correct?

Click to expand...

Yes, they slip onto the tailcap. Best plan is to set in boiling water for 1 minute, and then slip on (to ease installation) . It will never fall off

3. Got any pictures of one not installed?

Click to expand...

Not at the moment. Could put one up later.

Thanks for the order

These look terrific.

If they fit the Ra Clicky, I'd be in for three or four of them.

I already asked above. They don't fit.... I hope they do come out with one that fits it though. I have a Ra Clicky too.... I'd be ALL OVER it. However, I'd want the clip itself to be the polished/brushed SS color instead of black to match the bezel.

I will take one please.

Moddo,

Just a compliment...those look awesome, and nice touch with the stainless black oxide. I always wonder why more people dont use it.

Drew

Thanks for the comments, and orders guys.

PLEASE NOTE:
THESE DO NOT FIT MALKOFF LIGHTS TIGHTLY.

Similar parts that are actually purpose built for Malkoff lights are now in stock on Gene's website.
http://www.malkoffdevices.com/shop/pocket-clip-and-tail-shroud-to-fit-md2-p-84.html

Also, If you have a Surefire Z59 tailcap, the Malkoff shrouds will fit nicely, with the correct height, and a tight fit.

If you have an RA clicky, the Malkoff shrouds may work on them.
The fit on mine is pretty tight, but not as tight as the other lights. However, the knurling seems to grab into the delrin well.
This info is based on my testing with 1 RA clicky light. I cannot guarantee the fit on your light.