• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired sold: D maglite momentary switch with d2flex wired and ready to go 35$

spc

Enlightened
Joined
Sep 25, 2008
Messages
566
Location
Troutman, NC
D maglite switch with Taskled's newest d2flex driver. Replace your direct drive mag mod with this switch to get dimming control.

The stock mag switch has had the cam cut off, been modified for momentary action, modified to work with flat top cells and has a D2flex dimmer wired in and attached (with silicone wire good to 5 amps). The red icing is high temp silicone to hold the d2flex on as well as give it some protection.

The d2flex is the newest UI from Taskled

***The d2flex is a fequency driver and doesnt regulate current. Your power source must be matched to your emmiter. Heres one example that this will work perfect in= a p7 mag with a single li-ion cell. another would be an sst-50 with a single li-ion. Or even 3c nimh cells with these emitters..... Many combinations

40$ shipped
Sold

dsc02582i.jpg

dsc02578u.jpg
 
Last edited:

spc

Enlightened
Joined
Sep 25, 2008
Messages
566
Location
Troutman, NC
Re: FS: D maglite momentary switch with d2flex wired and ready to go

ill take 35$ for it
 

Hammer Train

Banned
Joined
Sep 3, 2008
Messages
716
Re: FS: D maglite momentary switch with d2flex wired and ready to go 35$

PM sent...
 
Last edited:

spc

Enlightened
Joined
Sep 25, 2008
Messages
566
Location
Troutman, NC
Re: FS: D maglite momentary switch with d2flex wired and ready to go 35$

your pm box is full Pete! I'll let you know donn, may be sold
 

Hammer Train

Banned
Joined
Sep 3, 2008
Messages
716
Re: FS: D maglite momentary switch with d2flex wired and ready to go 35$

Just cleared it buddy, and as per pm - I'll take it, if that's OK with Donn :poke:
 

spc

Enlightened
Joined
Sep 25, 2008
Messages
566
Location
Troutman, NC
I don't stock the parts, but I could build you one- hit me with a PM
 
Last edited:
Top