SF 10X dominator power supply/adaptor question

I need the help of some 10X owners! Usefull information from non 10X owners is of course also welcome...

The US power supply is a 110V T210 (thanks Sean, nice picture! ). T210

I want to use it with 220V -European system- (I want to buy one ).

-Therefore I could use a transformer (110V to 220V).
-I could use a 12V adapter (picture below)
-I also have a T230 (230V) power supply from my 8AX. On the back I see Output 12VDC..1200mA, the metal pin from the connection is the negative pole... . Here a picture of it:


So here my question:
-Could I use my T230 adapter instead of the US T210 to charge a 10X? (would the connector fit?how does the connector look?is the 1200mA allright?...)
-Is the 12V adapter/connection, provided with the 10X, the same kind like shown here?



Thanks very much!!!

PS: Sorry (and thanks!) to everybody because my website is down...

I have a T220 for the UK AC mains.
It's got a label -
INPUT: 240V ~50Hz
OUTPUT: 12V 1.6A

The SureFire connector between the Charger lead and the powersupply lead is the one in the photo on top of the T230.
As far as I know, all chargers and supplies use these connectors and all are interchangeable.

I use my T220 to power all my chargers:
C900 (10X)
C200 (B62)
C600 (9N)
CN400 (B90)

I also have several T001 Auto Power Adapters such as the one in the photo above. I often have a SureFire recharging in the car when I go away for the weekend or whatever.

I don't see any reason why you shouldn't use the T230 to power the C900 10X charger. After all, I assume the T230 comes with the 10X931 is the same as your T230 just as the T220 is the same as the T220 supplied with the 10X921.

Yes, the T001 supplied with my 10X is the same as the T001 in the photo above.

I hope this helps?

Respectfully,

Al

Al,

thanks very much , You had been a great help .

I will give it a try. When I got my 10X I will let you know if it works or not...