Jetbeam M1X flickering (not happy)

mefistofele86 · May 3, 2010

Finally i bought a Jetbeam M1X. I use a couple of AW 18500. The light flicks, it flicks on max and also on "medium" when batteries has less than 3.8v.
Now i tried 3xcr123a and it still flicks (cr has 3.01V)
M1X seems work well only with fresh batteries.
Threads are clean.. I need help

i like very much this light but at this time is unusable..

LowFlux · May 3, 2010

Try removing the tailcap and use a paperclip between a battery negative terminal and a non-anodized portion of the body tube; see if the light flickers with that setup. Perhaps you have a bad tail switch. Otherwise, if all contacts are clean you might have a defective light.

mefistofele86 · May 3, 2010

Tomorrow i'll send it back. I'm very disappointed with Jetbeam. There are too many cases of malfunctions.

Jetbeam M1X flickering (not happy)

mefistofele86

Newly Enlightened

LowFlux

Enlightened

mefistofele86

Newly Enlightened

Similar threads

Latest posts