Sold/Expired Canceled ...

Hello, :wave:

here is my preorder Thread for a single run run of my Mag C-Cell heatsink ... There will be no second run. The run is closed on 07-01-2010 (1.7.2010) and you'll have to pay at this point. I'll need at least 15 heatsinks for this run If there is less interest there will be no run. All orders will be canceled.

They are designed to work with a Mag C-Cell. SSR-50 oder SSR-90 Leds are mounted onto the heatsink with two screws ... The heatsink is very massive so that you can run the SSR @ 9A/5A for a longer period of time compared to most other heatsinks available. They are made out of Aluminum.

They'll look like this:





Everything put together ... A coper one which is not for sell here.


Price
One AL heatsink is ... If you want 3 or more shipping whithout insurance is included.


Shipping
Price listed below include shipping charge up to 500grams enough to send up to 8 heatsinks via German post.
Delivering time is about 7 days within Europe and a 14 days to USA and the rest of the world.

• Shipping and handling is
• For insurance please add another

cheers

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

I'll take #1 for SSR 90 PM with Paypal info -CPF member

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

I'll PM Paypal info if there are orders for 15 heatsinks

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

I'll take 1 for a ssr-50

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

Great heatsink :thumbsup:. It'd be nice for an aspherical SST-50/90 Maglite.

rayman

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

Put me down for one, thanks!

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

One for me please.

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

Raoul_Duke has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

Click to expand...

Raoul_Duke if you see this contact me via E-mail ... [email protected]

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

you can put me down for one ssr-90

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

Please add me to the list for one.

Thank you

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

@ Raoul_Duke

I#m not able to answer you've exceeded your stored private messages quota

Where is the contact for the +'ve on the driver...do you cover the whole think in glue and run a contact wire/ spring to the bottom of the heatink?

Click to expand...

I've used this as the Vin contact: http://www.google.de/images?hl=de&q=eurocent&um=1&ie=UTF-8&source=og&sa=N&tab=wi

btw you'll have to tell Der Wichtel that the GND wire has to be on the top site of the driver (L+,L- and GND on the one site and Vin on the other site)

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

One for me please!

Btw, how long time does one have to be a member for to send pm?

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

Put me down for one, please

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

Btw, how long time does one have to be a member for to send pm? 06-17-2010 11:32 AM

Click to expand...

I think ~5 Posts ....

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

bump to get the list filled

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

With such a deep heat sink, is there any room left for a driver?

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

There are two possibilities ... Direct drive the LED with 3* or 4* NimH or using the 5A or 9A der Wichtel driver (shown in the third picture). The driver is placed under the mag switch. A second heatsink is needed for the driver (picture 3).

Re: Presale: Mag C-Cell SSR-50/SSR-90 massive heatsink ...

All orders canceled due to the fact that there is not enough interest ...

cheers