Smallest 1x123 w/ remote switch?

jamesavery22 · Jul 2, 2010

plan so far:

9P head
fivemega 3P body
Pelican 2326 tape switch
Nailbender 1mode XP-G r5

Anyone have any better ideas?

Not interested in a SF m300. Not interested in that rail mount.

gswitter · Jul 2, 2010

Smallest?

E1e/E2e incandescent bezel
koala/yclo or kuku427 LED tower module
Aleph 1x123 body
SF m300/m600 tape switch (UE07)

With a C2 for reference...

jamesavery22 · Jul 2, 2010

gswitter said:
Smallest?

E1e/E2e incandescent bezel

koala/yclo or kuku427 LED tower module

Aleph 1x123 body

SF m300/m600 tape switch (UE07)

With a C2 for reference...
snip

Awesome...

Know of any good places to get the incandescent bezel and a cheaper place than surefire.com to get the UE07?

Thanks for the idea

gswitter · Jul 2, 2010

UE07's show up in the Marketplace occasionally, and they frequently don't sell, so I'd recommend posting a WTB over there.

You shouldn't have any trouble getting an incan bezel in the Marketplace.

Depending on your application, I don't know if I'd actually recommend that set-up. The LED towers for the E-series incan bezels produce great flood beams, but very little throw. Malkoff's VME head is only a few mm longer and can accept any of Malkoff's drop-ins as well as some aftermarket P60 drop-ins.

jamesavery22 · Jul 3, 2010

Lots of flood is fine by me as long as there is some hotspot. Saw kuku427's beam shots of the setup:
http://www.cpfmarketplace.com/mp/showthread.php?p=2509539

Thats fine.

Is the Aleph 1x123 body smaller than the standard e1e body? Obviously doesn't have the clip... Other than that?

gswitter · Jul 4, 2010

jamesavery22 said:
Is the Aleph 1x123 body smaller than the standard e1e body? Obviously doesn't have the clip... Other than that?

Other than the clip, they're very similar. I haven't measured them, but I'd be surprised if they weren't the same length.

jamesavery22 · Jul 4, 2010

Only asked bc I was going to get that e1e that went on ebay for $51 shipped. Maybe a tad cheaper than the Aleph and the bezel separately.
I lost it and the Aleph will be easier to mount anyway

Again, thanks for the idea

jamesavery22 · Jul 28, 2010

Here is where it ended up:

Haven't given it any abuse yet. Will soon.

Smallest 1x123 w/ remote switch?

jamesavery22

Newly Enlightened

gswitter

Flashlight Enthusiast

jamesavery22

Newly Enlightened

gswitter

Flashlight Enthusiast

jamesavery22

Newly Enlightened

gswitter

Flashlight Enthusiast

jamesavery22

Newly Enlightened

jamesavery22

Newly Enlightened

Similar threads

Latest posts