Salu from Russia, this is my first post so not much kick
Judging from the size originally planned JetBeem E3P make an entry 17500, but for some reason the Chinese are stuck there AA batteries put inside a plastic bumper, which is like and do not let, but it's not about us, do the following:
</SPAN>1. Put lights in the freezer for about 20 minutes
2. Spins and Pulls lantern
3. slight movement of his little finger take out bumper
Voila, now you can put one inside the 123rd element with spacers (I used a suitable nut wrapped her tape) or a LI-Ion 17500.
The best part of this redesign is that the brightness at maximum rezhimeuvelichilas 30 percent
Beware, when tested at a maximum of 30 minutes of light warmed to 58 degrees celsius
Judging from the size originally planned JetBeem E3P make an entry 17500, but for some reason the Chinese are stuck there AA batteries put inside a plastic bumper, which is like and do not let, but it's not about us, do the following:
</SPAN>1. Put lights in the freezer for about 20 minutes
2. Spins and Pulls lantern
3. slight movement of his little finger take out bumper
Voila, now you can put one inside the 123rd element with spacers (I used a suitable nut wrapped her tape) or a LI-Ion 17500.
The best part of this redesign is that the brightness at maximum rezhimeuvelichilas 30 percent
Beware, when tested at a maximum of 30 minutes of light warmed to 58 degrees celsius