octupus_paul
Newly Enlightened
- Joined
- Aug 1, 2010
- Messages
- 1
I have a Surefire E1L moded with following spec., see if anyone like it.
Body:
- Original Surefire E1L Body, with KX1 Head.
- The whole flashlight is in like-new condition.
Mod on head (KX1):
- Led Emitter replaced with a XR-E R2 (WC).
- Led Driver replaced with a 2 mode 7135 driver.
- High(100%) drove at around 1amp, puts out around 200lm.
- Low(5%) drove at around 0.1amp, puts out around 10lm.
- Original TIR lens, which gives a beam profile of a very tight hot-spot, superb throwing power.
Runtime:
- At High, it runs for about 35-40 mins with one AW RCR123 battery (750mah).
- The driver was designed to work with input voltage between (2.8-6V).
- Never attempt to drive it with 2 x RCR123.
- Battery protection kicks in at 2.8V, flickering indication.
$160 with shipping cost included (to US). I'm living in Hong Kong, so it might take a bit of time to get there (around 7-10days).
Interested pls. contact via email, [email protected]
Paypal only.
Body:
- Original Surefire E1L Body, with KX1 Head.
- The whole flashlight is in like-new condition.
Mod on head (KX1):
- Led Emitter replaced with a XR-E R2 (WC).
- Led Driver replaced with a 2 mode 7135 driver.
- High(100%) drove at around 1amp, puts out around 200lm.
- Low(5%) drove at around 0.1amp, puts out around 10lm.
- Original TIR lens, which gives a beam profile of a very tight hot-spot, superb throwing power.
Runtime:
- At High, it runs for about 35-40 mins with one AW RCR123 battery (750mah).
- The driver was designed to work with input voltage between (2.8-6V).
- Never attempt to drive it with 2 x RCR123.
- Battery protection kicks in at 2.8V, flickering indication.
$160 with shipping cost included (to US). I'm living in Hong Kong, so it might take a bit of time to get there (around 7-10days).
Interested pls. contact via email, [email protected]
Paypal only.
Last edited: