CMG Infinity Contact Problem

See that the copper has came off the pcb? Someone tell me how to fix this?

It's hard to tell from the picture.
The copper came off or the black "blob"?

The copper came off, I had placed some solder on the black blob to melt it off. So now I get copper and solder, and if you can see, at the bottom solder blob there is a thin black line, that's the shadow caused by the copper lifting off the pcb.

My Infinity (white)had the same problem and I sent it back to CMG for replacement. Their phone number is (888)699-0622. The replacement light was very blue-ish and noticebly dimmer, so I sent that back and they sent me another new one - even dimmer than the last replacement and still had blue-ish hue. My original light, though tempermental when turning it on, was bright and white.

They (CMG) were very nice and I didn't want to seem like a P.I.T.A. by calling a third time!

The moral of the story - if you don't have a white Infinity, or it your "white" Infinity is blue-ish, you'll probably be all set.