• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired SOLD: One more ---- Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
All sold

Cree recently raised XPG max current rating to 1.5 Amp, stated spec up to 493 lumens @ 1.5A:
http://74.125.93.132/search?q=cache:...&ct=clnk&gl=us

This light is designed to push XPG-R5 to its maximum spec potential:

The light uses 2 Li-ion with 2x800mA constant current driver wired in parallel to deliver 1.6 Amp total current to LED. I learned to use this driver from the original DEFT thread here (See post #1 for the driver):
http://www.candlepowerforums.com/vb/...d.php?t=183261
This will push the XPG R5 over 500 LED lumens.

A new reflector that I am proud to introduce with this light: Hybrid Sputter Reflector:

  • It's known CPF knowledge that OP reflector gives much better beam than SMO
  • It's known CPF knowledge that SMO can out throw OP by 30%
  • It's known CPF knowledge that the lower half of the reflector is mostly responsible for poor beam quality of SMO.
  • Hybrid reflector (More OP on bottom half) has been introduced as a product by FM in the past, however, the top half is still OP not SMO: https://www.candlepowerforums.com/threads/207494

The Special Hybrid Sputter Reflector introduced with this light for the first time, Light OP treatment only on the bottom half, the Top half remains SMO. As a result, this light is able to achieve perfect beam without loss of throw vs. SMO. Finally, a perfect harmony between perfect beam & ultimate throw is reached.

Spec:

  • Brand New Mag 2C in Titanium Grey/Gun Metal color
  • Powered by 2x Li-ion.
  • XPG R5 on 14mm board (Pure white tint, no green, no yellow)
  • Brass Heat sink
  • 22 AWG Silver Coated Teflon Wires
  • Dual 800mA CC driver delivering 1.6 Amp to the Led.
  • Custom Hybrid Sputter Mag reflector
  • Over 500 led Lumens from a single led per Cree spec
  • Perfect beam, Thanks to the lower half light OP treatment
  • Ultimate throw, thanks to the SMO of top half of the reflector
  • This will blow away the Malkoff XPG drop-in & possibly the Hound dog thrower.
  • This would give you 2-3 hours of long Run time if 2x C-lions are used.
Price is $95,
add $10 for Shipping & PP Fee. USA Only. Batteries not included.

I left the battery tube stock, but there are many many ways to run 2xLi-ion in a Mag 2C, the light will Run on:


  • 2x18500 protected Li-ion with a DIY PVC battery sleeve
  • 2x18500 un protected Li-ion with a DIY battery sleeve
  • 2x17500 protected Li-ion with a DIY battery sleeve
  • 2x17500 un protected Li-ion with a DIY battery sleeve

  • 2x18650 protected Li-ion with download's Mag C Ring Kit
  • 2x18650 IMR 18650 with recessed spring mod
  • 2x18650 unprotected li-ion with recessed spring mod
  • 2x DX 25500 C-lion, unprotected version
  • 2x AW IMR 26500 if bore out the battery tube to 26 mm
  • 2x AW old protected C-lion with a an AW C-lion 10mm cell extender

  • 2x DX 25500 C-lion, protected version with a an AW C-lion 10mm cell extender
  • 2x AW old protected C-lion with a FiveMega deep & Wide SS Mag C tail Cap

  • 2x DX 25500 C-lion, protected version with a FiveMega deep & Wide SS Mag C tail Cap
AW C-lion 10mm cell extender sold here: http://www.lighthound.com/AW-C-Cell-...ght_p_109.html)

FM's Deep & Wide mag C Tail CAP sold here: https://www.candlepowerforums.com/threads/215997


img4171a.jpg


dscf7701.jpg


dscf7673.jpg



Beam Shot for white Wall hunters:
img5147t.jpg


Outdoor beam shots will be up against the 5xCree R2/1200 lumen light on the left,
which is a very good thrower, the 5xCree/SMO module is already an excellent thrower, can out throw p7/MCE & SST-50 on OP Mag reflector.
dscf7639y.jpg



Control Shot:
dscf7781.jpg


5xR2 Cree, 1200 Lumens. Distance to the wall about 55ft.
IS0200, 1" exposure,F3.3
dscf7778.jpg


Single XPG-R5, SMO/LOP Hybrid Sputter Reflector: >500 lumens
IS0200, 1" exposure,F3.3
dscf7779.jpg
 
Last edited:

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

bumpty
 

LEDAdd1ct

Flashlight Enthusiast
Joined
Jul 4, 2007
Messages
3,557
Location
Hudson Valley
Re: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

Another great build, Ma! Not my kind of light, but someone will snap this up for sure, and enjoy it. By the way, I appreciate your signature. There is something joyful about participating in something just for the fun of it. Sometimes doing something for money/as a service can really hurt that intrinsic pleasure. Good luck with the sale. :)
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

Thanks!

I only put that note up as I had to repeatedly turn down job requests.
Nothing against people doing mods as a service. For me I simply didn't want to turn a hobby that's a stress relief into a "Job" which creates stress :devil:
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

Bumpty
 
Last edited:

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Reduced: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

Price Reduced to $89
 

donn_

Flashaholic
Joined
Oct 10, 2007
Messages
8,067
Location
Great South Bay, LINY
Re: Reduced: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

Ma..how is the heatsink fastened into the tube? I ask because I would want to move the build to another C-Mag.
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Reduced: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

Ma..how is the heatsink fastened into the tube? I ask because I would want to move the build to another C-Mag.

Donn,

The heat sink is plug-in with Arctic Silver 5 thermo paste, not glued shut. The LEDs are hard wired to the driver/switch assembly. It can be un-pluged but you'll need to cut the wires first. Losen the switch, then push it down to expose the twin drivers mounted above the switch & the wires above. De-solder or cut the wires, transfer all the innerts into a new host & then re-solder the wires in the new light.

If you don't feel comfortable doing it, I am willing to do it for you after payment, send in your host & I'll do it for you.

Since you don't care about this host, I'll keep this Gray 2C & it'll be no extra charge on you.
 

Hammer Train

Banned
Joined
Sep 3, 2008
Messages
716
Re: Reduced: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

If you can ship to the UK, I'd take it?
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Reduced: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

Thanks

I'll ship to UK for $10 extra & will only accept PP gift for international transactions. If that's ok with you, this XPG super thrower is yours.

PM sent.
 

Hammer Train

Banned
Joined
Sep 3, 2008
Messages
716
Re: Reduced: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

Great, we have a deal - awaiting pm. Although out of respect to Donn I will pass if he takes it ahead of me. After all, he's been around longer than I have! Paypal ready.
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Reduced: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

SPF

Thanks, Hammer Train
 

donn_

Flashaholic
Joined
Oct 10, 2007
Messages
8,067
Location
Great South Bay, LINY
Re: Reduced: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

Donn,

The heat sink is plug-in with Arctic Silver 5 thermo paste, not glued shut. The LEDs are hard wired to the driver/switch assembly. It can be un-pluged but you'll need to cut the wires first. Losen the switch, then push it down to expose the twin drivers mounted above the switch & the wires above. De-solder or cut the wires, transfer all the innerts into a new host & then re-solder the wires in the new light.

If you don't feel comfortable doing it, I am willing to do it for you after payment, send in your host & I'll do it for you.

Since you don't care about this host, I'll keep this Gray 2C & it'll be no extra charge on you.

Excellent! I'll pay shortly, and get the new host off to you. Please email your PayPal and snailmail address to
email.jpg



Great, we have a deal - awaiting pm. Although out of respect to Donn I will pass if he takes it ahead of me. After all, he's been around longer than I have! Paypal ready.

Thanks, Hammer. I appreciate it.
 

Hammer Train

Banned
Joined
Sep 3, 2008
Messages
716
Re: Reduced: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

Nice grab Donn, I'll have to keep an eye out if he makes another of these.

Please refund my payment and this one is Donn's.

Donn - You're welcome.

Excellent! I'll pay shortly, and get the new host off to you. Please email your PayPal and snailmail address to
email.jpg





Thanks, Hammer. I appreciate it.
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: SPF: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

I just got payment from Hammer train, I am going to stay out & let you guys decide who gets this light.

But don't forget, on the corner of B/S/T, there's the Might "Turbo" await,
Tri SST-50, Copper-on-Copper-On-Copper, Over 3000 lumens & with a ton of throw :devil:
turbou.jpg
 

donn_

Flashaholic
Joined
Oct 10, 2007
Messages
8,067
Location
Great South Bay, LINY
Re: SPF: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

It looks like it was decided in post #15. HammerTrain has graciously allowed me to take the light.
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Reduced: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

Nice grab Donn, I'll have to keep an eye out if he makes another of these.

Please refund my payment and this one is Donn's.

Donn - You're welcome.


Thanks Hammer Train, PP refund sent,
Don't forget, there's still the Mighty "Turbo" await, you know you deserve to have it :)
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: SPF: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

It looks like it was decided in post #15. HammerTrain has graciously allowed me to take the light.


HammerTrain came through, it's yours.

Thanks Donn, email sent with my PP info & My address.

I have a feeling it's that Orange thing coming...:crackup:
 

donn_

Flashaholic
Joined
Oct 10, 2007
Messages
8,067
Location
Great South Bay, LINY
Re: SPF: Mag 2C * XPG R5 * 1.6 Amp *Hybrid Reflector*Over 500 Lumens*

HammerTrain came through, it's yours.

Thanks Donn, email sent with my PP info & My address.

I have a feeling it's that Orange thing coming...:crackup:

:paypal:

The host will leave tomorrow. It may be that orange thing (which would look good in that car up there!), but I have a few other options as well.

Tell me..If I were to use the build in a longer C-Mag..what's the maximum voltage for the drivers..9V?
 
Top