High quality P60 type dropin that will handle 12 volts?

Do anyone know of a high quality P60 type LED dropin that can handle 12 volts (4 CR123)? Most of the one's I see only handle 9 volts max.

Nailbender sells one!

Cree XP-G R5

1 level 2.8-6 volts or 4-14 volts / 1.4 amp

You will just have to scroll down and find it

Thrunite XP-G.R5

4v-13v multilevel drop in
〇 493 LED Lumens (1.5A Drive Current) 
〇 3 Output Modes H>M>L - 100% > 40% > 1% = 493LED lumens > 200 lumens > 10lumens 
〇 Memory mode: Remembers and activates to last level used. 
〇 4-12V input voltage 
〇 Cree XP-G R5 LED 
〇 Outer spring is removable for some fitments 
〇 Alumium textured/OP reflector with bronze heatsink base 
〇 Bezel diameter: 26.5mm 
〇 Copper base diameter: 19mm 
〇 Height including support spring: 36.7mm 
〇 Height excluding support spring: 28.8mm

http://www.thrunite.com/productsweb/3 Mode Drop-in.html

The Lumens Factory single mode is a reasonable quality piece and is available in a 3.7v-13v input.

Hard to get these days, but I believe the Malkoff M60 MC-E is 5-13 volts

ebow86 said:

Do anyone know of a high quality P60 type LED dropin that can handle 12 volts (4 CR123)? Most of the one's I see only handle 9 volts max.

Click to expand...

Just out of curiosity what are you using as a host?

recDNA said:

Just out of curiosity what are you using as a host?

Click to expand...

Surefire 9P with A19 extender. I run a KT2 turbohead on it but I would like the ability to quickly switch to the normal 1.25 bezel with an LED dropin when I need it.