Lens fogging

chiphead

Flashlight Enthusiast
Joined
Nov 16, 2003
Messages
1,155
Location
Hutto,TX
As I was going from an air condition room to the humid rainy outdoors I'd noticed that the lens on my Inova T3 fogged up. Does someone have a fix for this, I was going to use RainX No-Fog, but I don't know how it will effect the coating.

chiphead
 

Bullzeyebill

Flashaholic
Joined
Feb 21, 2003
Messages
12,164
Location
CA
If it fogged up on the outside of the lens use a soft cotton wash cloth and gently wipe the lens. If you can rinse it safely with water do that first.

Bill
 

alpg88

Flashlight Enthusiast
Joined
Apr 19, 2005
Messages
5,333
rain x will coat the glass with thin film, wheather it will affect coating permanently is a good question, but it will most likely defeat the purpose of original coat, at least for as long as rain x is there.
 

chiphead

Flashlight Enthusiast
Joined
Nov 16, 2003
Messages
1,155
Location
Hutto,TX
rain x will coat the glass with thin film, wheather it will affect coating permanently is a good question, but it will most likely defeat the purpose of original coat, at least for as long as rain x is there.
I've got a clunker I want to try the Rain-X on just to see what happens. I've got to have my gear together for this winter, I think it's going to be a cold/wet one.

chiphead
 

wyager

Flashlight Enthusiast
Joined
Feb 10, 2010
Messages
1,114
How hard is it to wipe off the freakin lens one time? :thinking:
 
Top