• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired SOLD5Mega 1x18650 M head Ctail/D36Dropin/SF M3 head

purelite

Enlightened
Joined
Nov 9, 2005
Messages
546
Hi all!!

I have a few items for sale . All unused as received from 5mega,Surefire etc.

Gonna go a different route in lighting and this is all not being used so off it must go!!!

2 options

SOLDEverything as a set for $151 shipped 1st class mail CONUS

Parted out please post here what you want

5mega 1x18650 M head C tail body HA Nat. finish these are sold out and probably never to be seen again!! $69 shipped

Surefire M3 head for D36 modules . I also have a unique little doodad I am also including with this head. Its a set of Kydex molded spacers to replace the shock absorbing foam strip . What this Kydex does is keep the refector from being pushed upwards and losing contact with the pill so you dont need the outer spring and you get heat transfer to the body of the light thru the pill contacting the body of the light these heads seem to be getting harder to find these days $51.00 shipped

Nailbender 3 mode XPG R5 D36 dropin includes an extra D36 reflector $35.00 shipped

1st I'll take it here takes priority

PP only at this time please No PP Fees!!!!
International shipping can be done at buyers expense cost of the actual shipping only




 
Last edited:

ShineOnYouCrazyDiamond

Flashlight Enthusiast
Joined
Aug 18, 2009
Messages
4,442
Location
CT, USA
Re: FS:5Mega 1x18650 M head Ctail/D36Dropin/SF M3 head

I'll take the full package - I've got a few ideas I'd like to try with this.

I'm very sorry - I must withdraw my interest.... Good luck with the sale it's a great item.
 
Last edited:

purelite

Enlightened
Joined
Nov 9, 2005
Messages
546
Re: FS:5Mega 1x18650 M head Ctail/D36Dropin/SF M3 head

Hi Donn!!

Sure I will take a shot. Pretty simle concept. two pieces that fit into the spave above the reflector and replace the foam rubber.





It basically keeps the dropin from moving upwards and losing contact with the body. If I had the equipment I would make them from aluminum or something but the best I could come up with was hand forming from Kydex which is fun stuff to work with and very flexible stuff. I did two pieces because I was worried that a solid piece would get locked in there and become very difficult to remove. with two pieces they come out relatively easy. I have contemplated a one pice unit but never got around to trying it.
 
Last edited:

donn_

Flashaholic
Joined
Oct 10, 2007
Messages
8,067
Location
Great South Bay, LINY
Re: FS:5Mega 1x18650 M head Ctail/D36Dropin/SF M3 head

:thanks:

A clever solution. Mind if I steal it?

It looks like ~1/8" Kydex, and I think I have some around here somewhere.
 

purelite

Enlightened
Joined
Nov 9, 2005
Messages
546
Re: FS:5Mega 1x18650 M head Ctail/D36Dropin/SF M3 head

Go for it!!!

I cant remember the thickness but it is the middle one I believe. Maybe .5ml?

Let me know if you need any pointers. It will take a cpl tries to get it close. Then a bit of hand sanding . Its a good afternoon project
 

purelite

Enlightened
Joined
Nov 9, 2005
Messages
546
Re: FS:5Mega 1x18650 M head Ctail/D36Dropin/SF M3 head

Alright I will split it all up seperately. No need for takers for each piece:wave:
 

purelite

Enlightened
Joined
Nov 9, 2005
Messages
546
Re: 2nd Price drops!!5Mega 1x18650 M head Ctail/D36Dropin/SF M3 head

2nd price drop and catch ya in the morning here:tired:
 

jkt

Newly Enlightened
Joined
Jan 13, 2010
Messages
69
Location
Taiwan
Re: 2nd Price drops!!5Mega 1x18650 M head Ctail/D36Dropin/SF M3 head

Hi,
I will take it,PM sent.
jkt:D
 

purelite

Enlightened
Joined
Nov 9, 2005
Messages
546
Re: 2nd Price drops!!5Mega 1x18650 M head Ctail/D36Dropin/SF M3 head

PM sent JKT.

Assuming you are taking just the 5Mega 1x1860 body?
 

richpalm

Banned
Joined
Jun 21, 2003
Messages
965
Location
Central Pa.
Re: 2nd Price drops!!5Mega 1x18650 M head Ctail/D36Dropin/SF M3 head

I'll take the dropin and the spacer if it's not gone.

Rich
 
Top