• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired QUAD P60 XPG Drop-ins now available! Up to 1780 Lumen.

VanIsleDSM

Enlightened
Joined
Oct 16, 2007
Messages
649
Location
Victoria BC, Canada.
f82e15b8.jpg


bfabfa33.jpg


392e1988.jpg


607e4072.jpg



P60 QUAD Information thread:
https://www.candlepowerforums.com/threads/299178


Specs:

Precision machined to fit genuine surefire and FM26XXX P60 hosts.

Single Li-Ion cell operation for energy density and safety.

LEDs individually current regulated.

Integrated thermal shutdown.

Reverse polarity protection. Upside down battery causes no harm.

2KV ESD protection. Resistant to static shock from your fingers.

Low battery warning (drops to low mode and intermittently flashes off quickly).

Mil-Spec Teflon insulated oxygen free silver plated copper conductors.

Silver plated beryllium copper ground spring with gold plated contact.

Gold plated positive contact.

Cushioned shock resistant driver.

Modified Khatod Italian made 10 degree FWHM (tested with XPE) beam. Tightest beam possible from P60 multi-LED engine. More common Carclo optics pictured for comparison are 16.4 degree FWHM. (Frosted version pictured)




Available Tint and Flux:

R5 Cool white 6200K

R3 Neutral 5000K

R4 Neutral 4000K

Q5 Warm 3000K



Available Driver Mode Configurations:

5 mode: Low - Med - High - Strobe - SOS
3 mode: Low - Med - High
3 mode: Low - High - Strobe
2 mode: Low - High
1 mode: High



5.6A silver plated copper Drop-in:

R5 minimum flux calculates to 1780 lumens.

R4 minimum flux calculates to 1665 lumens.

R3 minimum flux calculates to 1560 lumens.

Q5 minimum flux calculates to 1370 lumens.


Thermal Data:

C101 99.99% pure oxygen free copper thermal conductivity: 391 W/m · oK

99.9% pure silver plating thermal conductivity: 418 W/m · oK

LEDs directly mounted to silver plated copper surface. No MCPCB insulation layer. Lowest thermal resistance path possible without extremely exotic materials (e.g. diamond)

Artic Silver 5 thermal paste included for application in host P60 socket.

$310




4.2A Aluminum Drop-in

R5 minimum flux calculates to 1450 lumens.

R4 minimum flux calculates to 1355 lumens.

R3 minimum flux calculates to 1270 lumens.

Q5 minimum flux calculates to 1115 lumens.


Thermal Data:

6061 T6 aluminum thermal conductivity: 167 W/m · oK (Heatsink)

Pure aluminum thermal conductivity: 220 W/m · oK (MCPCB)

Bare aluminum for best conduction of heat into host. MCPCB screw torqued to 32 in-lb. creating a clamping force of over 1000 lbs. Arctic Silver 5 thermal paste applied between MCPCB and heatsink.

Artic Silver 5 thermal paste included for application in host P60 socket.

$165



FETtie high current switch

Information Thread:
https://www.candlepowerforums.com/threads/296127

Introducing the ultimate high power tailcap switch for Z41 and FM26XXX hosts.

Designed as a suppliment to the P60 Quad drop-in, This switch's capabilities extend well beyond it's originally intended necessity.

With ANY Linearly regulated or Direct Drive light, this will reclaim power currently being eaten by your higher resistance switch/spring, and give you more current, and more lumens.

With ANY Buck, Boost, or Buck-Boost regulators, this will reclaim power currently being eaten by your higher resistance switch/spring, and provide longer runtimes.

31a5c04e.jpg


0c0d44d1.jpg




How does it work?

The FETtie uses a solid state semiconductor, a MOSFET. Essentially a relay, with no moving parts, which is turned on by the clicky switch. The Clicky switch itself only conducts 100 nanoamps, that's 0.0000001A, to activate the semiconductor. This means the clicking mechanism will last nearly forever, as the electrodes will not wear from arcing.

The FETtie uses a small coin battery, 1216 size. You do not need to worry about this battery becoming depleated however. It's like the battery in a watch, it will last for many years. Even being left on, the switch will draw less current from the coin cell than it's self discharge rate


Specifications:

Current - 25A+

Voltage - 12V MAX

0.0034 ohm Rds(on) MOSFET resistance

Beryllium copper spring, Pure silver plated for extra conductivity, 24K gold plated contact area.

Gold plated contacts from the FETtie to host.

Threaded brass body

Panasonic 1216 coin cell included


$48



Here are some graphs comparing it's performance to a McClicky switch with various cells using my 4.2A Quad drop-in. These results would be compounded with higher currents.

The graphs stop at 1.84A, a figure corresponding to 750 lumens, or half brightness of the drop-in.

0012ab67.jpg



8504a666.jpg


7fd7559f.jpg






Warning:
These lights can be dangerous. If left unattended it could get hot enough to cause a failure in the battery, resulting in a possible fire or explosion. Do not point light at eyes or skin. This is a very high power device. Do not run unattended.


Ordering:

All Drop-ins are customized to you, and are built to order.

PAYMENT TEMP. ClOSED. Next 10 slots will be open ASAP.

PM me if Paypal is not an option for you. I will also accept money orders.

Please include your CPF name, and your itemized order in the Paypal notes. This helps me keep track of everything.

I will be opening 10 slots at a time. The first 10 people to confirm and pay will have their order built in the order paid. After 10 orders have been completed another 10 slots will be opened.

1. Drywolf
2. kellyglanzer
3. ejot
4. Syncytial
5. OneBigDay
6. Glenn7
7. quadcree
8. nailbender
9. one2tim
10. X_Marine
11. J-Frame

Shipping:

$10 to USA, $15 internationally

Shipping by airmail, no insurance included.

Upgrade to expediated shipping with tracking and insurance for $25 to USA

Ask about international expediated shipping.

Within Canada it's ridiculous at the post office, I'll be checking a courier for the first person within Canada and let you know.
 
Last edited:

Drywolf

Flashlight Enthusiast
Joined
Feb 18, 2008
Messages
1,246
Location
Golden Poppy State
I'll take one please:
5.6A Silver plated copper Drop-in, R5 - 3 mode: Low - Med - High, $310
and FETtie high current switch for FM26xxx, $48
$10 shipping to USA
Total $368.00

:paypal:

Sent in two payment.

So_ready.jpg


..........................................................................:devil::party::devil::cool:
.............................................................................:caution:...:caution:
 
Last edited:

ejot

Enlightened
Joined
May 27, 2009
Messages
372
Location
East Fishkill, NY
I'll take one please.

5.6A silver/copper, R4 4000K, one mode, standard shipping to USA.

Looks nice. :thumbsup:
 

kellyglanzer

Enlightened
Joined
Dec 4, 2009
Messages
437
Location
British Columbia
Payment Sent (Unique Transaction ID #2KK12492VP9154446)

I haven't had time to send my flashlight to you yet. I'll get it out monday. :)
I can hardly wait to see this.



I think this is what I would like.
3 mode: High-Med-Low
R4 Flux 4250K 5B1 Tint (spec from one of your posts, i believe you said this is your favorite tint?)
1660 Raw lumen minimum output 5.6A driver

I am sending you an FM 1x26650 host with two differant heads. You can determine which is more suitable for your drop in.
If anything in my selection is less than ideal please let me know and I will get the correct items.
regards

Kelly
 

syncytial

Newly Enlightened
Joined
Apr 3, 2009
Messages
195
I will take:

1x 4.2A Aluminum Drop-in - $165
(R4 Neutral 4000K, R4 minimum flux calculates to 1355 lumens, 3 mode: Low - Med - High)

1x FETtie high current switch - $48

Stand by for PM...


- Syncytial.
 

OneBigDay

Enlightened
Joined
Nov 29, 2009
Messages
406
Location
Minneapolis, MN
I'll take one! For use with 1x26650 FM host $223 total

R5 Cool white 6200K
3 mode: Low - Med - High
4.2A Aluminum Drop-in
$165

FETtie high current switch
$48

Shipping to US
$10

:paypal:
 

quadcree

Banned
Joined
Oct 22, 2010
Messages
4
I will take these for use in my Fivemega 26xxxx host, cant wait!

1x 4.2A Aluminum Drop-in - $165
(R4 Neutral 4000K, R4 minimum flux calculates to 1355 lumens, 3 mode: Low - Med - High)

1x FETtie high current switch - $48

Intl shipping - $15

$228 paypal sent
 
Last edited:

nailbender

Flashlight Enthusiast
Joined
Nov 9, 2008
Messages
3,682
Location
North Carolina
Hi

I will take a 4.2 amp R5 High / Med / Low
If a choice I would like a narrow beam lens

fettie switch for FM 26XXX series.

1 domestic shipping

thanks :paypal:

Dave
 
Last edited:

one2tim

Enlightened
Joined
Dec 13, 2008
Messages
225
Location
Copenhagen
Hi, i Will take:
1x 5,6v Copper R4 narrow optic. 3 mode low/med/high
1x fettie switch
International shipping
373$ sent
 

X_Marine

Enlightened
Joined
Jan 15, 2007
Messages
711
Location
Houston, Tx
I'll take 1..

Working on order and pp, be right back.

5.6A silver plated copper Drop-in:
R5 minimum flux calculates to 1780 lumens.
3 mode: Low - High - Strobe

$310.00
expedited shipping $25
Total w/shipping $335.00

PP sent.. :paypal:

Thanks
X/BillyD..

I must say the presentation is awesome.
 
Last edited:

stoli67

Enlightened
Joined
Jul 29, 2010
Messages
926
Location
Sydney Austalia
I will take an r4

Silver plated

Stoli67


Oh 3 mode low-med-high


I have sent a PM prior to finalising the Paypal....
 
Last edited:

scout24

Flashaholic
Joined
Dec 23, 2008
Messages
8,869
Location
Penn's Woods
I'm holding on to my wallet with both hands as it tries to fly out of my pocket... Do you have an approx. timeframe between the end of the first run of 10 and shipment? Thanks.
 

J-FRAME

Newly Enlightened
Joined
Jan 11, 2006
Messages
138
I would like a 5.6 A silver plated copper drop-in R5 2 mode High/low narrow clear for as much throw as possible ??$310 Also a FETtie high current switch $48 and $10 US shipping $368 incoming to Pay Pal Thanks Terry
 

VanIsleDSM

Enlightened
Joined
Oct 16, 2007
Messages
649
Location
Victoria BC, Canada.
Glenn7, if you don't mind the slightly larger size I would go wit the 26650 host. It affords longer runtimes and provides for better heatsinking.

All of the optics that are included with the drop-ins are the most narrow beamed as possible. 10 degree FWHM. If there is interest I can also provide some 20 degree and 30 degree optics to switch around.

First run is full and payment is closed for now. I dont like the idea of holding onto someone's money for too terribly long without sending the goods, so I at first I'm keeping the runs small so I can stay on top of everything. I hope to open another 10 slots in about 8 days. I will update as i near completion of this run.
 
Top