Hi everyone,
I am pleased to announce the sale of my latest project. An Icon rogue I. This light typicly runs on 1AA cell and has a max output of about 50 lumens. I have replaced the stock emitter with a brand new N bin MCE from Cutter that is factory rated to output 980 lumens max . The factory driver has also been replaced.
Spec:
Icon Rogue 1 silver body
Top bin MCE emitter
3 mode driver High 2.8A, med, low
Powered by 1x AW IMR 14500 (NOT INCLUDED)
Lanyard and extension are included.
I just recetly descoverd the Icon lights. I think they are a unique and attractive looking host, but dont take my word for it lets go to the pics.....
Size reference
Because of the high current draw this light MUST be run on IMR 14500 cells ONLY. The 2.8A drain on high is too much for standard 14500 cells.
How about a few beam shots.
For these shots camera settings were the same for all WB set to auto and ISO 400.
First up an old familiar friend, Surefire 6P
Icon Rogue MCE on Low
Medium
High! .................................................. .. VS 6P again for side by side shot
EDIT: I guess outside the camera barely pics up the low mode so I took a couple shots inside so you can see there is in fact a usable low.
Camera settings for indoors was WB auto ISO 100.
Surefire 6P
Icon on low.
Price is 119$ Shipped!
PP is vesture_of_blood(@)hotmail.com
I am pleased to announce the sale of my latest project. An Icon rogue I. This light typicly runs on 1AA cell and has a max output of about 50 lumens. I have replaced the stock emitter with a brand new N bin MCE from Cutter that is factory rated to output 980 lumens max . The factory driver has also been replaced.
Spec:
Icon Rogue 1 silver body
Top bin MCE emitter
3 mode driver High 2.8A, med, low
Powered by 1x AW IMR 14500 (NOT INCLUDED)
Lanyard and extension are included.
I just recetly descoverd the Icon lights. I think they are a unique and attractive looking host, but dont take my word for it lets go to the pics.....
Size reference
Because of the high current draw this light MUST be run on IMR 14500 cells ONLY. The 2.8A drain on high is too much for standard 14500 cells.
How about a few beam shots.
For these shots camera settings were the same for all WB set to auto and ISO 400.
First up an old familiar friend, Surefire 6P
Icon Rogue MCE on Low
Medium
High! .................................................. .. VS 6P again for side by side shot
EDIT: I guess outside the camera barely pics up the low mode so I took a couple shots inside so you can see there is in fact a usable low.
Camera settings for indoors was WB auto ISO 100.
Surefire 6P
Icon on low.
Price is 119$ Shipped!
PP is vesture_of_blood(@)hotmail.com